D-Link DCS-6620G User Manual page 62

DCS-6620G User's Manual
Configuration > Tools > Default
Apply
Click
changes effective
Click on the Default button to access the factory setting restoration and camera calibration
options from the Tools menu.
Click Default
Click Apply on the screen to restore factory default settings.This means any changes made will
be lost and the system will be reset to the initial status when shipped from the factory. After
confirmation, the system will restart and require the Installation Wizard software program to
locate the IP address of the DCS-6620G.
Click Apply under Calibrate to restore them camera's factory lens position. This means that
the camera will be recalibrated to the default center to position to recover from any external
forces that may have affected it.
D-Link Systems, Inc.
to make
Using the DCS-6620G with an Internet Browser
62