Power Supply; Getting Started - LEXIBOOK RL380 Owner's Manual

RL380 - 8 langues
Congratulations on the purchase of your Lexibook RL380! This document is a brief
guide, which illustrates RL380 main features and functions. It will also help and guide
you with the usage of the product.
Installing and replacing batteries:
RL380 works with 2 AAA batteries (not included). When the LCD display is dim, the AAA
batteries need to be changed:
• Open the cover of the battery compartment located at the back of the unit.
• Insert 2 x AAA battery ensuring the polarities are correctly aligned.
• Close the battery compartment.
Important Precautions:
Replace batteries as per the instructions above; failure to do so may lead to the loss of
information stored in the unit's memory. Non-rechargeable batteries should not to be
recharged. Do not use rechargeable batteries. Batteries should be inserted with the
correct polarity. Exhausted batteries should be removed from the unit. The supply
terminals should not be short-circuited. Do not mix old and new batteries. Do not mix
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. Do not bury
or burn used batteries. Use alkaline batteries for best performance and longer life. Only
use batteries of the same or equivalent types as recommended.
WARNING: If the unit malfunctions or receives an electrostatic shock, remove the
battery and replace it again.
Static label: Before using this unit, please remove the clear film label from the LCD
screen by pulling the tab.
Copyright © Lexibook 2005
16/02/05 16:26
E E N N G G L L I I S S H H
INTRODUCTION

POWER SUPPLY

GETTING STARTED

Page 3
1