Page 2
Installation TIA / EIA TIA / EIA T568A T568B White/Green White/Orange Green Orange White/Orange White/Green Orange Green Blue White/Blue White/Brown Brown...
Page 3
Installation Step 1: Strip off 1.5 in. (40 mm) of cable jacket. Fold back the braiding. 0.4 in. (10 mm) 1.5 in. (40 mm)
Installation Step 2: Insert the cable into the termination cap and fan out all four twisted pairs. Following the instruction of the color-coded wire position printed on the termination cap, position conductors in the proper slots. Trim the ends of the conductors.
Page 5
Installation Step 3: Install the termination cap to the outlet, which will also allocate the conductors sitting on the slots.
Page 6
Installation Step 4: Secure the hinged outlet by using a crimping tool until it snaps into place to complete the connection.
Seller will repair or replace the product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: TRIPP LITE; 1111 W. 35th Street, Chicago, IL 60609. Seller will pay return shipping charges. Visit tripplite.com/ support before sending any equipment back for repair.
Page 8
PRODUCT REGISTRATION Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Need help?
Do you have a question about the N238-SHC8-TF-1 and is the answer not in the manual?
Questions and answers