Download
Share
Print this page
  1. Manuals
  2. Brands
  3. elho Manuals
  4. Farm Equipment
  5. SCORPIO 550
  6. Assembly instructions manual

elho SCORPIO 550 Assembly Instructions Manual

Hide thumbs Also See for SCORPIO 550:

Advertisement

Quick Links

Download this manual
SCORPIO 550
ASSEMBLY INSTRUCTIONS
Serie 10.6

Advertisement

loading
Need help?

Need help?

Do you have a question about the SCORPIO 550 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for elho SCORPIO 550

Summary of Contents for elho SCORPIO 550

  • Page 1 SCORPIO 550 ASSEMBLY INSTRUCTIONS Serie 10.6...
  • Page 2 Unloading Assembling the drawbar Assembling the wheels Assembling the rakes Assembling reflector brackets...
  • Page 3 SAFTEY Use only appropriate equipment when lifting and handling machine parts. Use proper stands, work platforms and ladders to access areas that cannot be reached from ground level. Make sure the machine is securely supported before working on the machine. Use personal protective equipment: •...
  • Page 4 UNLOADING As delivered the machine is broken up into three packages: 1. Base machine with steel temporary shipping wheels mounted. Machine wheels inside the stone hopper. Drawbar attached on top of machine. 2. Tandem wheel axles on pallet. 3. Wings standing using custom supports. Toolbox All small parts, bolts and pins, are shipped in the toolbox or cardboard box.
  • Page 5 ASSEMBLING THE DRAWBAR Lifting point Lifting point The total weight for the drawbar is 360 kg (800 lbs). Use recommended lifting points and appropriate equipment when handling the drawbar. Lifting point...
  • Page 6 ASSEMBLING THE DRAWBAR Spring pin DIN1481 12X60 M12 x 45 bolt 534333 472111 472273, 70/50x33 mm. 562852 565295, 70/35,5x6 mm...
  • Page 7 ASSEMBLING THE DRAWBAR Connect the hydraulic hose from port A to a port marked 2+ and the hose from port B to a port marked T. NOTICE, cases where the hydraulic hoses are incorrectly connected will result in the drawbar extending when trying to lift the machine.
  • Page 8 ASSEMBLING THE DRAWBAR Remove the towing eye and attach it to the drawbar. Glue and tighten M20x80 bolts to 385 Nm. Attach the cover plate, part nr. 472665, with the supplied bolts and connect the bracket for the main hydraulic block.

  • Page 9: Assembling The Wheels

    ASSEMBLING THE WHEELS Lift the wheels carefully out of the hopper using appropriate lifting slings. One wheel weigh 180 kg (400 lbs).
  • Page 10 ASSEMBLING THE WHEELS Supported on the ground Tapered pin extractor, Part nr 472578, is located under Jacking point. the long hexbolt nut. Take care when removing the temporary wheels and attaching the wheels. Make sure the machine is well supported before removing any parts by two support jacks. Support height is 16 inch and the total weight on one jack is 2500 kg (5500 lbs).
  • Page 11 ASSEMBLING THE WHEELS Remove the long hexbolt, pull out both tapered pins and remove the temporary wheels.
  • Page 12 ASSEMBLING THE WHEELS Attach the tandem axle using the same tapered pins used for the temporary wheels. If the machine is supplied with brakes, the brakes should be on the front wheels. Tighten the M24 bolt to 935 Nm. One wheel axle has a total weight of 250 kg (550 lbs). The recomended method to lift the wheel axle in place is having the wheel axle on a pallet and lifting it with a forklift to the correct position.
  • Page 13 ASSEMBLING THE WHEELS Attach the wheels using eight wheel nuts, tighten to 450 Nm.

  • Page 14: Assembling The Wings

    ASSEMBLING THE WINGS Take care when removing the shipping supports and opening the wing package. The total weight of this package is 1100 kg (2400 lbs).
  • Page 15 ASSEMBLING THE WINGS 565295, 70/35,5x6 mm Spring pin DIN1481 12X60 472270...
  • Page 16 ASSEMBLING THE WINGS 565295, 70/35,5x6 mm 472270 Spring pin DIN1481 12X60...
  • Page 17 ASSEMBLING THE WING 472085 M20 nut and washer Assemble the support wheel 200-250 mm from the end plate.
  • Page 18 ASSEMBLING THE WINGS Connect the shorter hose (145669) from the rake motor to the outer port on the shock valve for the main rotor motors.
  • Page 19 ASSEMBLING THE WINGS Connect the longer hose (145019) from the rake motors to the main block ports marked R1- for the right side rake and port L1- for the left side rake.
  • Page 20 ASSEMBLING THE WINGS • Greenline connect to 50/50 divider under main block (4+) • Redline connects to T-connection on motor drain line (yellow) • Yellow line connect motor drain ports.
  • Page 21 ASSEMBLING REFLECTOR BRACKETS Front reflector brackets...
  • Page 22 ASSEMBLING REFLECTOR BRACKETS Machines with pneumatic brakes are type approved acording to eur167/2013. These machines are delivered with rear reflector brackets.