Norstar PLUS Compact ICS 1.0 System Coordinator Manual page 81

•
•
•
•
• •
• •
• •
•
•
•
•
•
Handling many calls at once
Using Hold
You can temporarily suspend a call by pressing
(Hold
J.
When a call is on hold, its indicator flashes on all telephones that
have access to the line . The call can be retrieved from any of these
telephones.
On the M7100 telephone,
IH01d
I
alternates between two lines;
one active, one on hold. The M7100 telephone cannot retrieve a call
placed on hold by another telephone .
Retrieving a held call
You can connect to a call on hold by pressing the flashing line button
of the held call.
Holding automatically
If your line has been programmed with full autohold, you can switch
from one call to another and have your calls put on hold
automatically.
• Press the line button of the caller you want to speak to. Your
current caller is put on hold automatically .
Listening on hold
If you have been put on hold, you can hang up the receiver while you
wait for the other person to return .
• Press
!Hold
I .
• Hang up the receiver .
• Press the line button of the call. You may hear indications from
the far end that you are on hold (for example, tones or music).
• When the person you were talking to returns you will hear them
through your telephone speaker. Lift the receiver and talk .
Compact ICS 1 O Sys1em Coordina1or Gu>de