Making Calls - Norstar PLUS Compact ICS 1.0 System Coordinator Manual

• •
•
•
•
• •
• •
•
•
• •
•
• •
•
There are many ways to make a call. Depending on programming
and the type of call, these are the ways to make a call :
• Pick up the receiver and dial. The Norstar system supports three
methods of dialing. See Changing how you dial your calls on
page 49 .
• Pick up the receiver, press a line button, and dial (if the call is not
on your prime line) .
• Press
I
H•t£~:·..
I
and dial (to talk without using the receiver). See
Using Handsfree/Mute on page 40.
• Press
I
H•~-~:·••
I.
press a line button, and dial (to talk without the
receiver and if the call is not on your prime line).
• Press a line button and dial (to talk without the receiver and if
Automatic Handsfree is assigned to your telephone) .
• Use one of the features that make dialing easier. See Time
savers for making calls on page 65.
Displays
2 1
bus~
PRlORITV
UHER
9_
QUIT BKSP
95551234
TRl=lN SFER
l=l l read~
joined
The telephone you have called has no
internal lines available. Press LRTER to use
the Ring Again or Message features or press
PRIORITY to make a priority call.
You are dialing using Pre-Dial. To erase an
incorrect digit, press the left end of
I,.,, Ft» I
or
BKSP.
When the number is
complete, select a line or lift the receiver.
This prompt remains on your display as long
as you are on a call you have dialed. To
transfer the call, press
TR~NSFER
.
Your telephone is already connected to the
telephone you are trying to call. Check your
active line buttons, and return to that call.
Compact ICS 1 O System Coordrnator Guode