Norstar PLUS Compact ICS 1.0 System Coordinator Manual page 136

126
I
Using System features
No services OH
Services ON
MODES
You have erntered the Show Services feature
code and th, e re is no active Service.
There is a Service active in your system.
Press
El
or
LIST
to view the active Services.
For other displays, see Common feature displays on page
151 .
Services that have been turned on automatically are indicated by an
asterisk(") before the name on the display. You can neither
manually activate nor cancel scheduled services, although you can
override them by manually turning on another schedule.
The control telephone can override Services that are turned on and
off according to a schedule at any time by entering a Services
feature code, and selecting a different schedule. This override
remains in effect until it is canceled . If you select a schedule with an
asterisk(*), the next automatic service schedule comes into effect at
the programmed time.
Direct-dial calls to a direct-dial telephone ring at the extra-dial
telephone (the extra-dial telephone is designated by your installer or
customer service representative) only when you enter the Ringing
service feature code
(1 Fea1ure
I[)~
EJ)
at that direct-dial
telephone. Note that only the extra-di al telephone is activated, not
the actual Ringing service (unless that direct-dial telephone is also
a control telephone).
Tip -
Norstar provides six service schedules named Night,
Lunch, Evening, Sched 4, Sched 5, and Sched 6. Your
installer or customer service representative can change
these names to suit your business.
Using passwords
Your passwords prevent unauthorized or unintentional changes to
your Norstar system. To keep your telephone service secure,
distribute the password only to selected personnel or make use of
the basic password described below. Record your password in a
secure place and change it periodically.
Compact ICS 1.0 Syslem Coordinator G uide
• •
•
•
• •
•
•