Advertisement
Manual for Indoor LoRaWAN
Gateway - GWIND
Thank you very much for choosing Daviteq Wireless Sensors. We are the leading wireless sensor manufacturer in the
World. We have a wide range of wireless sensors which support different connectivity like LoRaWAN, Sigfox, Sub-GHz,
NB-IoT...Please find out more information at
This manual is applied to the following products
Item code
GWIND-9
To use this product, please refer step by step to the below instructions.
1. Quick Guide
Reading time: 10 minutes
Finish this part so you can understand and put the sensor in operation with the default configuration from the
factory.
1.1 What is the GWIND ?
GWIND is a LoRaWAN Gateway designed for indoor installation, used in projects such as Smart Factory, Smart
Agriculture, Smart Building, Smart Residential Area, Smart City... It supports simultaneously 8 connection channels to
help receive a large number of packets from surrounding LoRaWAN sensors. The connection distance to the LoRaWAN
sensors is up to 10 Km (depending on the environment and sensor types). It supports common communications such
as Ethernet, LTE, WiFi. LoRa frequency support 863~870 MHz / 902~928 MHz.
This LoRaWAN Gateway is widely used in applications such as reading water meters, electricity meters, gas meter,
environmental monitoring, smart farms, smart factories...
1.2 What's in the package?
The package includes:
01 x LoraWAN Gateway
01 x Lora Antenna
01 x LTE Antenna
01 x Adapter
this
link.
HW Version
1.0
Firmware Version
1.0
Remarks
Advertisement
Table of Contents
Related Manuals for daviteq GWIND Series
Summary of Contents for daviteq GWIND Series
- Page 1 Manual for Indoor LoRaWAN Gateway - GWIND Thank you very much for choosing Daviteq Wireless Sensors. We are the leading wireless sensor manufacturer in the World. We have a wide range of wireless sensors which support different connectivity like LoRaWAN, Sigfox, Sub-GHz, NB-IoT...Please find out more information at...
-
Page 2: Product Overview
1.3 Product Overview 1.3.1 I/O Ports... -
Page 3: Installation
1.3.2 LED Functions LED Functions Constant Flashing Power Power On Booting /OTA Internet Internet Available Checking Internet Service LNS Connected LNS Not Connected LoRa LoRa Working Initializing LoRa Not Working 1.3.3 Reset Button Reboot: By pressing and holding the RESET Button, the Power LED will start flashing. The “reboot” procedure will be triggered when the RESET Button is released while the Power LED light is flashing. - Page 4 Step 2: Insert the SIM card into the LoRaWAN Gateway Remove the plastic plate in the SIM socket, then insert the SIM card into the socket with correct SIM direction. Pay attention to the direction of the SIM Note: If the gateway use only Ethernet port to connect to Network Sever, skip step 2 Step 3: Connect the Ethernet cable and power up the Gateway Connect the Ethernet cable into RJ45 port.
- Page 5 1.5.1 GUI Access Default mode of Daviteq Gateway is DHCP. Once gateway is turned on through plugging in the DC adapter, it will automatically link to available servers. Gateway’s IP address can be found from the DHCP server. Access Gateway Web UI via the DHCP IP on browser.
- Page 6 Status, Wan Settings and 3G/4G LTE Log. WAN Status The current network status will be shown on this page. WAN Settings Daviteq Gateway supports three WAN Modes: Ethernet WAN, 3G/4G LTE and Dual WAN (Ethernet+3G/4G). Default mode of Daviteq Gateway is Dual WAN.
- Page 7 Note: Configure “APN” information according to mobile service provider requirements. 1.5.3 Lora Settings The LoRa menu consists of the following categories: Mode Selection, Channel Scan and Log. Configure some basic fields for the gateway operation. Mode selection At the field, choose the "Packet Forwarder" option and click the "APPLY" button to Enable the Packet Forwarder mode. After applying the setting, the "Packet Forwarder"...
-
Page 8: Product Specification
Radio and Channel Settings This page is for configuring the radio 0 and radio 1 configurations of Lora, including Central Frequency, Channel Status, and Center frequency offset. The frequencies and channels are regulated by the lora-alliance, region and the network server. -
Page 9: Warranty And Support
Operating Temperature -10°C ~ 55°C Storage Temperature -20°C ~ 60°C DC 12 V/1.5 A-Power Adaptor / DC 10~30 V 3-Pin Connector Power Power Supply supply / Passive PoE 10~30 V 4G LTE LTE Cat 4 or Cat M1/NB2 1 WAN RJ45 10/100Mbps (w/ passive PoE capability), 1 SIM card slot Interfaces (2FF), 1 DC jack in / 1 terminal block Antenna Type...
Need help?
Do you have a question about the GWIND Series and is the answer not in the manual?
Questions and answers