Advertisement
Quick Links
Manual for Outdoor LoRaWAN
Gateway - GWLRW
Thank you very much for choosing Daviteq Wireless Sensors. We are the leading wireless sensor manufacturer in the
World. We have a wide range of wireless sensors which support different connectivity like LoRaWAN, Sigfox, Sub-GHz,
NB-IoT...Please find out more information at
This manual is applied to the following products
Item code
GWLRW-9
To use this product, please refer step by step to the below instructions.
1. Quick Guide
Reading time: 10 minutes
Finish this part so you can understand and put the device in operation with the default configuration from the
factory.
1.1 What is the GWLRW ?
GWLRW is a LoRaWAN Gateway designed for outdoor installation, used in projects such as Smart Factory, Smart
Agriculture, Smart Building, Smart Residential Area, Smart City... It supports simultaneously 8 connection channels to
help receive a large number of packets from surrounding LoRaWAN sensors. The connection distance to the LoRaWAN
sensors is up to 10 Km (depending on the environment and sensor types). It supports common communications such
as Ethernet, LTE, WiFi. LoRa frequency support 863~870 MHz / 902~928 MHz.
This LoRaWAN Gateway is widely used in applications such as reading water meters, electricity meters, gas meter,
environmental monitoring, smart farms, smart factories...
1.2 What's in the package?
The package includes:
01 x LoraWAN Gateway
01 x Lora Antenna
01 x LTE Antenna
01 x Adapter
01 x Accessory set
this
link.
HW Version
1.0
Firmware Version
1.0
Remarks
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for daviteq GWLRW
Summary of Contents for daviteq GWLRW
- Page 1 Manual for Outdoor LoRaWAN Gateway - GWLRW Thank you very much for choosing Daviteq Wireless Sensors. We are the leading wireless sensor manufacturer in the World. We have a wide range of wireless sensors which support different connectivity like LoRaWAN, Sigfox, Sub-GHz, NB-IoT...Please find out more information at...
-
Page 2: Product Overview
1.3 Product Overview 1.3.1 I/O Ports... -
Page 3: Reset Button
1.3.2 LED Functions LED Functions Constant Flashing Power Power On Booting /OTA Internet Internet Available Checking Internet Service LNS Connected LNS Not Connected LoRa LoRa Working Initializing LoRa Not Working 1.3.3 Reset Button Reboot: By pressing and holding the RESET Button, the Power LED will start flashing. The “reboot” procedure will be triggered when the RESET Button is released while the Power LED light is flashing. - Page 4 Step 2: Insert the SIM card into the LoRaWAN Gateway Remove the plastic plate in the SIM socket, then insert the SIM card into the socket with correct SIM direction. Pay attention to the direction of the SIM Note: If the gateway use only Ethernet port to connect to Network Sever, skip step 2 Step 3: Connect the Ethernet cable and power up the Gateway Connect the Ethernet cable into RJ45 port.
- Page 5 Step 4 : Close the gateway's cover, then use the hex wrench to lock the 4 screws. 1.5 Mounting Step 1: Mount the bracket to the steel pole with a hose clamp or attach it to the wall. Then mount the gateway on the bracket.
- Page 6 1.6.1 GUI Access Default mode of Daviteq Gateway is DHCP. Once gateway is turned on through plugging in the DC adapter, it will automatically link to available servers. Gateway’s IP address can be found from the DHCP server. Access Gateway Web UI via the DHCP IP on browser.
- Page 7 Step 3: Enter the IP address of the gateway in the web browser to access the configuration interface. For example, If the IP address of the Gateway is 192.168.1.15 , you should enter exactly that information in web browser, then the GUI will be displayed. 1.6.2 WAN configuration The purpose of this category is to view current WAN settings.
- Page 8 WAN Settings Daviteq Gateway supports three WAN Modes: Ethernet WAN, 3G/4G LTE and Dual WAN (Ethernet+3G/4G). Default mode of Daviteq Gateway is Dual WAN. Note: Configure “APN” information according to mobile service provider requirements. 1.6.3 Lora Settings The LoRa menu consists of the following categories: Mode Selection, Channel Scan and Log. Configure some basic fields for the gateway operation.
- Page 9 Select Packet Forwarder in the left menu, then choose Gateway Info. This page is for setting up the LoRa configuration including Gateway ID, Server Address, Server Uplink Port, Server Downlink Port, Keep-Alive Interval, Statistics Display Interval, and Push Timeout. Need to properly configure the Server Address, Server Uplink Port, and Server Downlink Port fields. These information depend on the Network server.
- Page 10 To give an example, please follow the instructions in this link to add LoraWAN gateway to The things Stack network server. 2. Product specification Please refer to the detailed specifications in this link 3. Warranty and Support For warranty terms and support procedures, please refer to this link.
Need help?
Do you have a question about the GWLRW and is the answer not in the manual?
Questions and answers