SoundPeats Mini Pro HS First Start-Up Quick Start Manual

First Start
Open the charging case Iid and take out both earbuds, then remove the protective film and put the
earbuds back into the case.
1. The earbuds automatically pair with each other after being removed from the charging case.
The LED indicator on the main earbud flashes red and white, and the second earbud shows solid
white.
2. Activate Bluetooth on the device, and choose "SOUNDPEATS Mini Pro HS" on Bluetooth List to
pair.
ANC Mode
Press and hold the left MFB for 1.5 seconds to switch between Normal mode/ ANC ON/
Pass-through mode.
Reset
1. Clear the pairing record from your device.
2. Place both earbuds back into the charging case and make sure they are in charging status.
3. Press and hold both buttons for 10s until both LEDs flash red and white twice; the reset is
complete.
Touch Control
Power On
Power Off
Play / Pause
Volume-
Volume +
Next Track
Answer / Hang Up Phone Call
Auto: Open up the case Iid and take out the earbuds
Manually: Press and hold the MFB for 1.5s
Auto: Place earbuds back into the case
Manually: Press and hold the MFB for 10s
Double tap the MFB
Single tap the left MFB
Single tap the right MFB
Press and hold the right MFB for 1.5s
Double tap the MFB