Vestergaard LifeStraw Quick Start Manual

WHAT'S IN THE BOX
Carbon
Filter
Filter
Housing
Membrane
Membrane
Micro lter
Microfilter
(Already installed)
Filter
Housing Cap
4
5
1
1. Rinse Carbon
Filter
Unwrap the
carbon lter
attached to this
card. Rinse under
cold, running tap
water for 1 minute.
4. Install Carbon Filter
Remove lter housing, pat dry.
Pull down and twist the bottom cap of the lter
housing to remove. Install carbon lter into
housing cap. Press cap back onto housing.
5. Final Rinse
Put the lter housing back into
the dispenser, ensuring spouts
align. Run one batch of water
through the lter. Discard water.
Ready to use! Enjoy fresh,
ltered water.
Carbon Filter
PRODUCT SETUP
2
2. Clean lter
housing and
dispenser
Remove lter
housing and rinse
with water only.
Hand wash the
dispenser body with
a mild detergent
and rinse.
NOTE: Flow rate may be slow
for rst few batches as air is
displaced from the lters.
Flow rate should improve
with use.
For lter replacements &
accessories visit
www.lifestraw.com
3
3. Rinse
Membrane
Micro lter
Put the lter
housing back
into the dispenser.
Run one batch
of water through
the lter. Discard
water.