Test Mode (Md) - Sony HCD-MDX10 - Compact Disk Deck Receiver Component Service Manual

5-1. PRECAUTIONS FOR USE OF TEST MODE
• As loading related operations will be performed regardless of the test mode operations being performed, be sure to check that the disc is
stopped before setting and removing it.
Even if the §EJECT (MD) button is pressed while the disc is rotating during continuous playback, continuous recording, etc., the disc
will not stop rotating.
Therefore, it will be ejected while rotating.
Be sure to press the §EJECT (MD) button after pressing the MENU/NO button and the rotation of disc is stopped.
5-1-1. Recording laser emission mode and operating buttons
• Continuous recording mode (CREC MODE)
• Laser power check mode (LDPWR CHECK)
• Laser power adjustment mode (LDPWR ADJUST)
• Traverse (MO) check (EF MO CHECK)
• Traverse (MO) adjustment (EF MO ADJUST)
• When pressing the REC (MD) button.
5-2. SETTING THE TEST MODE
The following are two methods of entering the test mode.
Procedure 1: With the power ON, press the CD-MD SYNC button while pressing the p and ENTER/YES buttons together.
When the test mode is set, "Check" will be displayed. Rotating the AMS dial switches between the following four groups;
···Nn Check Nn Adjust Nn Service Nn Develop Nn ···.
Procedure 2: With the power ON, press the REC (MD) button while pressing the p and ENTER/YES buttons together.
When the test mode is set, "TEMP CHECK" will be displayed. By setting the test mode using this procedure, only the "Check"
group of procedure 1 can be executed.
5-3. EXITING THE TEST MODE
Press the REPEAT/STEREO/MONO button.
5-4. BASIC OPERATIONS OF THE TEST MODE
All operations are performed using the AMS dial, ENTER/YES button, and MENU/NO button.
The functions of these buttons are as follows.
Function name
AMS dial Changes parameters and modes
ENTER/YES button Proceeds onto the next step. Finalizes input.
MENU/NO button Returns to previous step. Stops operations.
SECTION 5

TEST MODE (MD)

Function
– 22 –