Compact Disc Operation - Sharp QT-CD250 Operation Manual

<P=002>

COMPACT DISC OPERATION

2
REPEAT STOP
BAND TUNING
POWER REVIEW
(Function) PRESET
CD playback
1
Set the function switch to CD.
2
Open the CD compartment.
3
Place a compact disc on the spindle, label side
up.
3" (8 cm) discs may be played without an adap-
tor.
4
Close the CD compartment.
Total playing time
Total number of
tracks
5
Press the PLAY/PAUSE (
0 6
playback from track 1.
6
Press the VOLUME button to increase the
W
volume and the VOLUME
X
the volume.
7
Press the X-BASS button to emphasize the bass
region of the frequency spectrum.
The "X-BASS" indicator will light up.
Press the X-BASS button again to cancel the
extra bass mode.
The "X-BASS" indicator will go out.
4
3
PLAY / PAUSE
TUNING
/
PRESET
BAND
CUE
PRESET
To interrupt playback:
Press the PLAY/PAUSE (
playback.
Press the PLAY/PAUSE (
resume playback.
To stop playback:
Press the STOP ( ) button.
Precautions:
When "no dISC" or track number is displayed,
the power is connected.
If you will not be using the CD player, set the
POWER switch to OFF.
Do not open the CD compartment while the
disc is rotating.
If the disc is damaged, dirty, or loaded upside
down, "Er" or "no dISC" will appear in the
display.
Clean, replace, or reload the disc properly.
Keep foreign objects out of the CD compart-
ment.
) button to start
Subjecting the unit to shock or vibration may
cause mistracking.
Keep the CD compartment closed except
button to decrease
when loading discs.
Playing certain compact discs at a high
volume may cause mistracking. In this case,
listen at a lower volume.
The temperature range for playing compact
discs is recommended to be 41˚F (5˚C) - 95˚F
(35˚C).
If TV or radio interference occurs during CD
operation, move the unit away from the TV or
radio.
6
QT-CD250(SEC) TINSE0040SJZZ
TUNING
/
PRESET
TUNING
) button during
0 6
) button again to
0 6