Mpx Mode; Memorizing Station Presets - Pioneer VSX-9300TX Operating Instructions Manual

Using the tuner
06

MPX mode

If there is interference or noise during a stereo FM radio
broadcast (the STEREO indicator is lit), or the radio
reception is weak, press MPX on the remote to switch the
receiver into mono reception mode (the MONO indicator
lights). This should improve the sound quality and allow
you to enjoy the broadcast.
48
En
MPX

Memorizing station presets

If you often listen to a particular radio station, it's
convenient to have the receiver store the frequency for
easy recall whenever you want to listen to that station.
This saves the effort of manually tuning in each time. The
receiver can memorize up to 30 stations, stored in three
banks, or classes, (A, B and C) of 10 stations each. When
memorizing FM frequencies, the receiver also stores the
MPX setting (see MPX mode above).
TUNER
TUNER EDIT
ENTER
1 Tune to a station you want to memorize.
See Finding a station above and Tuning directly to a
station above for more details on how to do this.
2 Press TUNER EDIT.
The display shows MEMORY INPUT then a blinking
memory class (A, B or C).
3 Press CLASS to select one of the three classes.
Press repeatedly to cycle through the three memory
classes, A, B and C.
4 Use the STATION +/– buttons to select the station
preset you want.
On the front panel, press SELECT first to switch to the
station select mode for STATION (TUNING) +/–.
• You can also use the front panel MULTI JOG dial or
the number buttons on the remote control to select
the station preset.
5 While the display is blinking, press ENTER.
6 Repeat steps 1 – 5 to memorize up to 30 stations.
+
STATION DTV MENU CLASS STATION