Denon AVR-884 Operating Instructions Manual page 47

3
Play a program source.
4
Select the surround parameter mode.
(Main unit) (Remote control unit)
To perform this operation from the remote control unit,
check that the mode selector switch is set to "AUDIO".
5
Select the optimum mode for the source.
(Main unit)
or
6
Select the various parameters.
(Main unit) (Remote control unit)
7
Set the various surround parameters.
(Main unit)
8
Display
9
(Remote control unit)
or
(Remote control unit)
(Remote control unit)
When the surround parameters are set using the buttons on
the main unit, stop operating buttons after completing the
settings. The settings are automatically finalized and the
normal display reappears after several seconds.
Press the ENTER button to finish
surround parameter mode.
Surround parameters q
II
Pro Logic Mode:
• The Cinema mode is for use with stereo television shows and
all programs encoded Dolby Surround.
• The Music mode is recommended as the standard mode for
autosound music systems (no video), and is optional for A/V
systems.
• The Pro Logic mode offers the same robust surround processing
as original Pro Logic in case the source contents is not of
optimum quality.
Select one of the modes ("cinema", "music" or "Pro Logic").
Panorama Control:
This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect with
side wall imaging.
Select "OFF" or "ON".
Dimension Control:
This control gradually adjust the soundfield either towards the
front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only
from the center speaker; only from the left/right speakers as a
phantom image; or from all three front speakers to varying
degrees.
The control can be set in 8 steps from 0 to 7.
DTS NEO:6 Mode:
• Cinema
This mode is optimum for playing movies.
performed with emphasis on separation performance to achieve
the same atmosphere with 2-channel sources as with 6.1-
channel sources.
This mode is effective for playing sources recorded in
conventional surround formats as well, because the in-phase
component is assigned mainly to the center channel (C) and the
reversed phase component to the surround (SL, SR and SB
channels).
• Music
This mode is suited mainly for playing music. The front channel
(FL and FR) signals bypass the decoder and are played directly
so there is no loss of sound quality, and the effect of the
surround signals output from the center (C) and surround (SL,
SR and SB) channels add a natural sense of expansion to the
sound field.
CENTER IMAGE (0.0 to 0.5: default 0.2):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been added.
ENGLISH
(Remote control unit)
Decoding is
47