Specifications: Rod Sections: Four telescopic rod + One Tail rod Rod adapter material: Optimized galvanized iron Graduations: cm / inch Rod Wall Thickness: 10mm Connection interface between rods: 5/8" Height of rod section: 60cm/23.62" Height of arbitrary telescopic rod: 0-53cm /0-20.87" Max height after fully assembled: 3.7m / 12.14ft.
Installation Steps: 1. Rotate the Rod Sections to fully assemble with all four sections ③④⑤⑥. 2. Install the Height Adjustable Bracket ⑨ onto the assembled sections, and install the Top Ceiling Skid Plate ⑦ to the top of the rod sections. 3.
Page 5
Multi-purpose Bracket Installation Work with Firecore FLP370C / FLP370CX pole Fix the Bracket onto the rod sections through slot on the back clip and lock the pole lock. Work with metal surfaces Remove the back clip and attach the magnet bracket onto metal surfaces.
Maintenance and Care: 1. Don't over tighten the threads on the rod sections, just connect them together. Do not put too much pressure on the rod. 2. Appropriately applying lubricating oil to the adapter can help reduce wear and reduce broke apart during disassemble.
Page 7
ShenZhen Keze Co.,Ltd www.FIRECORETOOLs.com E-mail:firecoretools@gmail.com Facebook:@firecore.fans Made in China...
Need help?
Do you have a question about the FLP370CX and is the answer not in the manual?
Questions and answers