Page 1
FIRECORE FLP370C Laser Level Pole with Tripod User Guide...
Page 2
Specifications: Rod Sections: Four telescopic rod + One Tail rod Graduations: cm / inch Rod Wall Thickness: 10mm Connection interface between rods: 5/8" Height of rod section: 60cm/23.62" Height of arbitrary telescopic rod: 0-53cm /0-20.87" Max height after fully assembled: 3.7m / 12.14ft. Tripod height: 48-84cm / 18.90-33.07"...
Page 4
Installation Steps: 1. Rotate the Rod Sections to fully assemble with all four sections ③④⑤⑥. 2. Install the Height Adjustable Bracket ⑨ onto the assembled sections, and install the Top Ceiling Skid Plate ⑦ to the top of the rod sections. 3.
Page 5
Maintenance and Care: 1. Don't over tighten the threads on the rod sections, just connect them together. Do not put too much pressure on the rod. 2. Appropriately applying lubricating oil to the adapter can help reduce wear and reduce broke apart during disassemble.
Page 6
ShenZhen Keze Co.,Ltd www.FIRECORETOOLs.com E-mail:firecoretools@gmail.com Facebook:@firecore.fans Made in China...
Need help?
Do you have a question about the FLP370C and is the answer not in the manual?
Questions and answers