MAHA DUO CM 4.2 A Technical Handbook
  1. Manuals
  2. Brands
  3. MAHA Manuals
  4. Scissor Lifts
  5. DUO CM 4.2 A
  6. Technical handbook
MAHA DUO CM 4.2 A Technical Handbook

MAHA DUO CM 4.2 A Technical Handbook

Hide thumbs Also See for DUO CM 4.2 A:
Table of Contents

Advertisement

Quick Links

Download this manual
DUO CM / R-AS40/50CM
Scissors Lift
Technical Handbook
Pos : 1 /T ec hnis che D okumentati on/Alle Geräte/Titel texte/Titeltext: DUO CM - All e T ypen M AHA+ SLIFT @ 42\mod_1424078214517_0.doc x @ 2201832 @ @ 1
DUO CM 4.2 A
DUO CM 4.2 U
DUO CM 5.0 A
DUO CM 5.0 U
Pos : 2 /T ec hnis che D okumentati on/Hebetechni k/08
Sc heren-Hebebühnen/2901
DU O CM/BA/Inhalt: 0829 Titelbild @ 42\mod_1436788474721_0.doc x @ 2270252 @ @ 1
Pos : 3 /-----For mat-----/MANUELLER UMBRUCH Seitenumbruc h @ 0\mod_1134403577687_0.doc x @ 1277 @ @ 1
Fehler! Verwenden Sie die Registerkarte 'Start', um Name dem Text zuzuweisen, der hier angezeigt werden soll.Fehler!
Verwenden Sie die Registerkarte 'Start', um Name dem Text zuzuweisen, der hier angezeigt werden soll.Fehler! Verwenden
R-AS40CM A
R-AS40CM BA
R-AS50CM A
R-AS50CM BA
Sie die Registerkarte 'Start', um Name dem Text zuzuweisen, der hier angezeigt werden soll.
TH082901-en

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DUO CM 4.2 A and is the answer not in the manual?

Questions and answers

Related Manuals for MAHA DUO CM 4.2 A

Summary of Contents for MAHA DUO CM 4.2 A

  • Page 1 TH082901-en Pos : 1 /T ec hnis che D okumentati on/Alle Geräte/Titel texte/Titeltext: DUO CM - All e T ypen M AHA+ SLIFT @ 42\mod_1424078214517_0.doc x @ 2201832 @ @ 1 DUO CM 4.2 A R-AS40CM A DUO CM 4.2 U R-AS40CM BA DUO CM 5.0 A...

  • Page 2: Table Of Contents

    Pos : 4 /-----For mat-----/Inhalts verz eichnis @ 5\mod_1168867441046_75.doc x @ 72920 @ @ 1 Contents Safety ........................5 Symbols .............................. 5 Safety Information ..........................5 Installation Plans ..................... 5 Transport ......................... 6 Transport by Crane and 4-Sling Lifting Gear and Lifting Slings ............6 Positioning.......................
  • Page 3 12.3 CAN Bus Terminating Resistors ...................... 42 12.4 FLASH - Memory Card ........................42 12.5 Extending and Connecting the Measuring System Cable..............44 12.6 Testing the Measuring System ......................46 Error and Information Messages ................48 Special Programs ....................51 14.1 Special Programs without Service Mode ..................
  • Page 4 Pos : 6 /-----For mat-----/MANUELLER UMBRUCH Seitenumbruc h @ 0\mod_1134403577687_0.doc x @ 1277 @ @ 1 TH082901-en...

  • Page 5: Safety

    Pos : 7 /T ec hnis che D okumentati on/Alle Geräte/01/Ü bers chriften/Ü bersc hriften 1/S/Übersc hrift 1: Sic her hei t @ 6\mod_1174482399906_75.doc x @ 76962 @ 1 @ 1 Safety Pos : 8 /T ec hnis che D okumentati on/Alle Geräte/01/Ü bers chriften/Ü bersc hriften 1.1/S/Übersc hrift 1.1: Symbol e @ 6\mod_1174482270875_75.doc x @ 76865 @ 2 @ 1 Symbols Pos : 9 /T ec hnis che D okumentati on/Alle Geräte/01/Inhal te/Sic her hei t/Inhalt: Symbole Sic her heit @ 14\mod_1239866667866_75.doc x @ 361518 @ @ 1 Important safety instructions.

  • Page 6: Transport

    Pos : 18 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1/T/Ü bersc hrift 1: Trans port @ 25\mod_1314948595221_75.doc x @ 1037473 @ 1 @ 1 Transport Pos : 19 /T echnisc he Dokumentation/Alle Geräte/01/Inhalte/Warnung!/Inhalt: War nung - Trans port mit H ebez eug (kg) @ 24\mod_1308638198118_75.doc x @ 1017862 @ @ 1 For transportation, suitable hoisting equipment with chain suspension and lifting slings is required.

  • Page 7: Positioning

    Pos : 28 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1/P/Ü berschrift 1: Positionier ung @ 25\mod_1314948652985_75.doc x @ 1037503 @ 1 @ 1 Positioning Pos : 29 /T echnisc he Dokumentation/H ebetec hni k/08 Sc her en-H ebebühnen/2901 DUO CM/TH/Inhalt: 0829 Positionier ung (Text) @ 29\mod_1347977887733_75.doc x @ 1654543 @ @ 1 Position lift at installation location and remove packaging.
  • Page 8 Pos : 32 /T echnisc he Dokumentation/H ebetec hni k/08 Sc her en-H ebebühnen/2901 DUO CM/TH/Inhalt: 0829 Positini erungs vors chl äge ( Bilder) @ 43\mod_1440414813769_0.doc x @ 2294261 @ @ 1 Pos : 33 /T echnisc he Dokumentation/H ebetec hni k/08 Sc her en-H ebebühnen/2901 DUO CM/TH/Inhalt: 0829 D urc hgangs breite @ 42\mod_1424078943418_75.doc x @ 2201983 @ @ 1 Recommended Positioning...

  • Page 9: Initial Connection

    Pos : 35 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1/E/Ü berschrift 1: Erstans chl uss @ 25\mod_1314875601917_75.doc x @ 1036523 @ 1 @ 1 Initial Connection Pos : 36 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1.1/H /Übersc hrift 1.1: H ydr auli ks chl äuche und Sitz ventile ansc hließ en @ 43\mod_1440422715991_75.doc x @ 2294405 @ 2 @ 1 Connecting the Hydraulic Hoses and Seat Valves Pos : 37 /T echnisc he Dokumentation/H ebetec hni k/08 Sc her en-H ebebühnen/2901...

  • Page 10: Potential Equalization

    If a 10 ton drive-over option is active, the warning light is switched on throughout the service mode. The bypass control or seat valve control are active when the measuring systems are functional and the maximum permissible difference is not exceeded. Pos : 43 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1.1/P/Ü...

  • Page 11: Hydraulic Power Unit

    Pos : 48 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1/H/Übersc hrift 1: H ydraulikaggregat @ 30\mod_1363869579646_75.doc x @ 1726554 @ 1 @ 1 Hydraulic Power Unit Pos : 49 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1.1/D /Übersc hrift 1.1: DUO CM 1 / DUO CM2 / R .AS40/50CM @ 43\mod_1440423271304_0.doc x @ 2294461 @ 2 @ 1 DUO CM1 / DUO CM2 / R-AS40/50CM Pos : 50 /T echnisc he Dokumentation/H ebetec hni k/08 Sc her en-H ebebühnen/2901...

  • Page 12: Duo Cm1 / Duo Cm2 / Duo Cm3 / R-As40/50Cm

    Pos : 53 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1.1/D /Übersc hrift 1.1: DUO CM 1 / DUO CM2 / DU O CM 3 / R-AS40/50CM @ 32\mod_1368016368171_0.doc x @ 1770377 @ 2 @ 1 DUO CM1 / DUO CM2 / DUO CM3 / R-AS40/50CM Pos : 54 /T echnisc he Dokumentation/H ebetec hni k/08 Sc her en-H ebebühnen/2901 DUO CM/TH/Inhalt: 0829 H ydr auli kbloc k für PM S (T ext) @ 33\mod_1370500352958_75.doc x @ 1786488 @ @ 1...

  • Page 13: Duo Cm3

    Pos : 57 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1.1/D /Übersc hrift 1.1: DUO CM 3 @ 32\mod_1368016164982_0.doc x @ 1770333 @ 1 @ 1 DUO CM3 Pos : 58 /T echnisc he Dokumentation/H ebetec hni k/08 Sc her en-H ebebühnen/2901 DUO CM/TH/Inhalt: 0829 H ydr auli kbloc k für RFH bei DUO CM3 (Text) @ 33\mod_1370503608737_75.doc x @ 1786828 @ @ 1 Hydraulic Block for Wheel-Free Jack on DUO CM3 (Item no.
  • Page 14 Pos : 61 /T echnisc he Dokumentation/H ebetec hni k/08 Sc her en-H ebebühnen/2901 DUO CM/TH/Inhalt: 0829 H ydr auli kaggregat Grundbl oc k DU O CM 3 (Text) @ 35\mod_1390378940194_75.doc x @ 1877028 @ @ 1 Base Block DUO CM3 (2 pcs. Item no. 26000370) Reference Corresponding labelling at the...

  • Page 15: Final Connection

    Pos : 64 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1/E/Ü berschrift 1: Endanschl uss @ 25\mod_1314887707047_75.doc x @ 1037154 @ 2 @ 1 Final Connection Pos : 65 /T echnisc he Dokumentation/H ebetec hni k/08 Sc her en-H ebebühnen/2901 DUO CM/TH/Inhalt: 0829 Endanschl uss @ 25\mod_1314888920566_75.doc x @ 1037184 @ @ 1 Connect the hydraulic, pneumatic and electrical lines.

  • Page 16: Routing The Drain Line

    Pos : 72 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1.1/V/Ü berschrift 1.1: Verl egung der Lec köllei tung @ 42\mod_1423831705907_75.doc x @ 2200930 @ 2 @ 1 Routing the Drain Line Pos : 73 /T echnisc he Dokumentation/H ebetec hni k/08 Sc her en-H ebebühnen/2901 DUO CM/TH/Inhalt: 0829 Verlegung der Lec köll eitung @ 42\mod_1423832119655_75.doc x @ 2200976 @ @ 1 Make sure to route the drain lines without kinks or chafing from sharp edges.
  • Page 17 Pos : 79 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1.1.1/S/Ü berschrift 1.1.1: Sonder aus führung @ 33\mod_1370531430824_75.doc x @ 1787681 @ 2 @ 1 7.4.2 Special Version Pos : 80 /T echnisc he Dokumentation/H ebetec hni k/08 Sc her en-H ebebühnen/2901 DUO CM/TH/Inhalt: 0829 Verlegung Notab-Entrieg elung DUO CM3 12 s ec mi t Mittel kons ole (Text) @ 33\mod_1370530912527_75.doc x @ 1787593 @ @ 1 Version DUO CM3 with increased raising and lowering speed (12 seconds) requires that two wire ropes be used.

  • Page 18: Aligning, Fastening, Levelling

    Pos : 83 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1/A/Ü berschrift 1: Ausrichten, Befestigen, Ni vellier en @ 43\mod_1440423757179_75.doc x @ 2294882 @ 1 @ 1 Aligning, Fastening, Levelling Pos : 84 /T echnisc he Dokumentation/H ebetec hni k/00 HBZ All e/01/Inhalte/Info!/Inhalt: Info - Vor Ni vellieren H ydrauli k entlüften @ 25\mod_1316099770627_75.doc x @ 1049967 @ @ 1 After alignment and fastening, but prior to levelling, bleeding of the hydraulic system is required! (See the section “Bleeding the Hydraulic System.")
  • Page 19 Fixture points a Shim, short Set screw with lock nut Heavy duty anchor Fixture Points b Shim, long Set screw with lock nut Heavy duty anchor Support screw with lock nut The support screw (4) must not be used for the alignment of the lift. After aligning, screw the support screw to the shim and lock.
  • Page 20 8.1.2 Aligning the Standard Lift In the Lowest Position • Lower lift completely. • Check and, if necessary, correct dimension X. • Align runways by placing a bar to the runway fronts, check and correct if necessary. • Align the lift with the set screws to the fixture points in accordance with drawing below. In the Raised Position •...
  • Page 21 Fastening the Lift After aligning the base plates, lock all set screws. Drill the holes for the heavy duty anchors with a 15 mm ∅drill bit and clean the drill holes from drilling dust by blowing. Then insert the heavy duty anchor and tighten with a torque according to the manufacturer’s specifications.
  • Page 22 In the Lowered Position • Lower lift completely. • Check dimension X and, if necessary, correct. • Align runways by placing a bar to the runway fronts, check and correct if necessary. • Measure the lift with an optical levelling device at the 8 specified measuring points and align to the claws using the set screws (1).

  • Page 23: Levelling The Lift For Wheel Alignment

    Fastening the Lift After aligning the base plates, lock all set screws. Drill the holes for the heavy duty anchors with a 15 mm ∅drill bit and clean the drill holes from drilling dust by blowing. Then insert the heavy duty anchor and tighten with a torque according to the manufacturer’s specifications.
  • Page 24 Levelling • Set up optical levelling device. It is important that all eight measuring points (both at the inner and outer sides of the wheels) must be visible through the levelling device. During levelling of all eight measuring points, the location of the levelling device must not be changed! •...
  • Page 25 • The four upper bearings are adjusted by loosening the four hex head screws (2) by half a rotation. • Adjusting is performed via the set screws (1). The set screws of the fixed bearing must be each adjusted by the same amount of rotations.
  • Page 26 8.2.1 Levelling in the Lowered Position • Lower lift to lowest position. • Measure the eight measuring points with the measuring tripod and the optical levelling device. • The runways can be adjusted in the lower position via eight adjusting screws in the base plates.

  • Page 27: Compensating Rail For Foundation Depths 280/330 Mm

    Pos : 87 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1.1/A/Ü berschrift 1.1: Ausgl eichs schi enen für F undamenttiefe 280/330 mm @ 25\mod_1314968775623_75.doc x @ 1039379 @ 1 @ 1 Compensating Rail for Foundation Depths 280/330 mm Pos : 88 /T echnisc he Dokumentation/H ebetec hni k/08 Sc her en-H ebebühnen/2901 DUO CM/TH/Inhalt: 0829 Ausgleichssc hienen (T ext) @ 25\mod_1314969146247_75.doc x @ 1039439 @ @ 1 When a new lift is installed in an old, deep foundation (e.g.

  • Page 28: Bleeding The Hydraulic System

    Pos : 91 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1/H/Übersc hrift 1: H ydrauliks ystem entlüften @ 15\mod_1243517412900_75.doc x @ 382024 @ 3 @ 1 Bleeding the Hydraulic System Pos : 92 /T echnisc he Dokumentation/H ebetec hni k/00 HBZ All e/01/Inhalte/War nung!/Inhal t: Warnung - Entlüften unter Las t verboten @ 6\mod_1180961821578_75.doc x @ 95191 @ @ 1 Do not bleed the hydraulic system under load.

  • Page 29: Bleeding The Lift

    Pos : 97 /T echnisc he Dokumentation/Alle Geräte/01/Übersc hriften/Übersc hriften 1.1/H /Übersc hrift 1.1: Hebebühne entlüften @ 25\mod_1316100172893_75.doc x @ 1049997 @ 2 @ 1 Bleeding the Lift Pos : 98 /T echnisc he Dokumentation/H ebetec hni k/Arc hi v/08 Scheren-Hebebühnen/2801 M SL/TH/Inhal t: 0828 H ydrauli ks ys tem entl üften Bühne ( Bilder) @ 24\mod_1308665457724_0.doc x @ 1018325 @ @ 1 Pos : 99 /T echnisc he Dokumentation/H ebetec hni k/08...

  • Page 30: Bleeding The Wheel-Free Jack

    Pos : 101 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1.1/R/Ü berschrift 1.1: R adfrei heber entl üften @ 12\mod_1232372639974_75.doc x @ 316297 @ 2 @ 1 Bleeding the Wheel-Free Jack Pos : 102 /Tec hnisc he D okumentati on/Hebetec hni k/08 Scheren-Hebebühnen/2901 DUO CM /TH/Inhalt: 0829 H ydrauli ks ys tem entlüften RFH (Bil d) @ 33\mod_1370507016925_0.doc x @ 1786997 @ @ 1 Pos : 103 /Tec hnisc he D okumentati on/Hebetec hni k/08...

  • Page 31: Service Information

    Pos : 107 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1/S/Ü bersc hrift 1: Ser vic e-Infor mationen @ 8\mod_1206712914431_75.doc x @ 179499 @ 2 @ 1 Service Information Pos : 108 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1.1/N/Ü berschrift 1.1: N äher ungssc halter ei nstellen @ 20\mod_1274195458789_75.doc x @ 847091 @ 2 @ 1 11.1 Proximity Switches Pos : 109 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü...

  • Page 32: Installation Of Floor Cover

    5 Acknowledge the message by pressing the [LIFT UP] button. The light barriers of model DUO GN / R-AS40 (previous version) and model DUO CM / R-AS40/50CM (current version) are not compatible with each other! Pos : 115 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1.1/H/Ü berschrift 1.1: H ubboden einbauen @ 43\mod_1440425130996_75.doc x @ 2295359 @ 2 @ 1 11.3 Installation of Floor Cover Pos : 116 /Tec hnisc he D okumentati on/Hebetec hni k/08...

  • Page 33: Axle Play Detector (Optional)

    Pos : 119 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1.1/A/Ü bersc hrift 1.1: Ac hss pi eltester PM S (Opti on) @ 25\mod_1318577757946_75.doc x @ 1062543 @ 2 @ 1 11.4 Axle Play Detector (Optional) Pos : 120 /Tec hnisc he D okumentati on/Hebetec hni k/08 Scheren-Hebebühnen/2901 DUO CM /TH/Inhalt: 0829 MAH CAN RP - Variantenaus wahl @ 31\mod_1366269325235_75.doc x @ 1751673 @ 1 @ 1...
  • Page 34 Pos : 124 /Tec hnisc he D okumentati on/Hebetec hni k/08 Scheren-Hebebühnen/2901 DUO CM /TH/Inhalt: 0829 MAH CAN I8 Eingänge- Bel egung @ 25\mod_1318585318865_75.doc x @ 1062793 @ 23 @ 1 11.4.3 Connecting a Cable Hand Lamp Inputs ─ Configuration MAH CAN I8 Hex-switch "F" Input configuration for the MAH CAN I8 board for the connection of the cable hand lamp.
  • Page 35 Pos : 128 /Tec hnisc he D okumentati on/Papier korb/Prüf- und Sicherheits tec hni k/Inhalt: Ser vic e-Mode für PM S @ 24\mod_1306135584259_75.doc x @ 1011053 @ 2 @ 1 11.4.6 Service Mode for PMS To remove the sliding plates, the hydraulic cylinders must be pressure relieved. To do this, a Service mode was integrated.

  • Page 36: Cleaning The Drain Line

    Pos : 130 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1.1/L/Ü bersc hrift 1.1: Lec köllei tung rei nigen @ 42\mod_1423835558045_75.doc x @ 2201068 @ 2 @ 1 11.5 Cleaning the Drain Line Pos : 131 /Tec hnisc he D okumentati on/Hebetec hni k/08 Scheren-Hebebühnen/2901 DUO CM /TH/Inhalt: 0829 Lec köll eitung rei nigen (Text) @ 42\mod_1423834673984_75.doc x @ 2201022 @ @ 1 Periodically remove and clean the drain lines of the hydraulic cylinders to prevent clogging and...

  • Page 37: Servicing The Bearings

    Pos : 134 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1.1/L/Ü bersc hrift 1.1: Lagers tell en pr üfen und warten @ 42\mod_1423837806988_75.doc x @ 2201206 @ 2 @ 1 11.6 Servicing the Bearings Pos : 135 /Tec hnisc he D okumentati on/Hebetec hni k/08 Scheren-Hebebühnen/2901 DUO CM /TH/Inhalt: 0829 Lag erstell en pr üfen und warten - Info @ 42\mod_1424263121028_75.doc x @ 2203808 @ @ 1 The movable bearings have no slide bushings.
  • Page 38 Pos : 142 /Tec hnisc he D okumentati on/Hebetec hni k/08 Scheren-Hebebühnen/2901 DUO CM /TH/Inhalt: 0829 Losl ager prüfen und warten (Text 3) @ 42\mod_1424264258103_75.doc x @ 2203900 @ @ 1 3 Support the runway on the floor. Lower the lift until the slider blocks are above the foundation tub.
  • Page 39 Pos : 148 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1.1.1/F/Ü berschrift 1.1.1: F estl ager @ 42\mod_1424264991949_75.doc x @ 2203992 @ 3 @ 1 11.6.2 Thrust Bearings Pos : 149 /Tec hnisc he D okumentati on/Hebetec hni k/08 Scheren-Hebebühnen/2901 DUO CM /TH/Inhalt: 0829 F estl ager prüfen und warten (Text 1) @ 42\mod_1424266318390_75.doc x @ 2204130 @ @ 1 The thrust bearings are maintenance-free friction bearings, which must be periodically checked...
  • Page 40 Pos : 154 /Tec hnisc he D okumentati on/Hebetec hni k/08 Scheren-Hebebühnen/2901 DUO CM /TH/Inhalt: 0829 F estl ager prüfen und warten (Text 3) @ 42\mod_1424266544383_75.doc x @ 2204176 @ @ 1 If damaged bearings are found during inspection steps 1 and 2, these must be replaced. A hoisting device is necessary for carrying out this repair! Warning ‒...

  • Page 41: Information On The Control Electronics

    Pos : 157 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1/I/Übersc hrift 1: Informati onen z ur Steuerelektroni k @ 23\mod_1296115192423_75.doc x @ 966453 @ 2 @ 1 Information on the Control Electronics Pos : 158 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1.1/B/Ü bersc hrift 1.1: Besc hrei bung @ 16\mod_1246527377649_75.doc x @ 400654 @ 2 @ 1 12.1 Description Pos : 159 /Tec hnisc he D okumentati on/Hebetec hni k/00...

  • Page 42: Can Bus Terminating Resistors

    H BZ Alle/01/Inhalte/Inhalt: H S0812 F LASH-Speic her karte @ 33\mod_1370588589231_75.doc x @ 1788074 @ @ 1 The MAH HS0812 control board contains a FLASH memory card (KE item no. MAH SPI FL or MAHA item no. 52 0541), on which all software programs and settings are stored on. Replacing the Control Board If the control board is replaced, then the FLASH memory card must be taken from the old control board and inserted into the new control board.
  • Page 43 Pos : 170 /Tec hnisc he D okumentati on/Hebetec hni k/08 Scheren-Hebebühnen/2901 DUO CM /TH/Inhalt: 0829 SPI Flas h-Speicher (Bil d) @ 33\mod_1370589673669_0.doc x @ 1788111 @ @ 1 Pos : 171 /-----Format-----/MANUELLER UM BRUCH Sei tenumbruch @ 0\mod_1134403577687_0.doc x @ 1277 @ @ 1 TH082901-en...

  • Page 44: Extending And Connecting The Measuring System Cable

    Pos : 172 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1.1/K/Ü bersc hrift 1.1: Kabel für M ess s ystem verlängern und ans chli eßen @ 24\mod_1313051551864_75.doc x @ 1029624 @ 1 @ 1 12.5 Extending and Connecting the Measuring System Cable Pos : 173 /Tec hnisc he D okumentati on/Hebetec hni k/08 Scheren-Hebebühnen/2901 DUO CM /TH/Inhalt: 0829 Kabel verl äng ern M esss ystem (Text) @ 24\mod_1313050389720_75.doc x @ 1029594 @ @ 1...
  • Page 45 Pos : 176 /Tec hnisc he D okumentati on/Hebetec hni k/08 Scheren-Hebebühnen/2901 DUO CM /TH/Inhalt: 0829 Kabel ansc hließ en Messs ys tem (T ext) @ 33\mod_1372148497529_75.doc x @ 1796450 @ @ 1 Cable Connection Risk of damage! Failure to observe the following points can result in damage to the the measuring system. •...

  • Page 46: Testing The Measuring System

    Pos : 179 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1.1/F/Ü bersc hrift 1.1: F unkti on des M esss ystems prüfen @ 25\mod_1314966387569_75.doc x @ 1039259 @ 3 @ 1 12.6 Testing the Measuring System Pos : 180 /Tec hnisc he D okumentati on/Hebetec hni k/00 H BZ All e/01/Inhalte/Inhalt: H S0812 Funkti on Messs ys tem prüfen @ 42\mod_1424081005641_75.doc x @ 2202500 @ @ 1 Runways...
  • Page 47 Wheel-Free Jack The two measuring systems for the +A/+B of the WFJ are connected to the X11 of the HS0812 board. Measurement system left /+ A Measurement system right /+ B X11.1 24 V-Out X11.4 +24V-Out X11.2 Sensor signal X11.5 Sensor signal X11.3 X11.6...

  • Page 48: Error And Information Messages

    Pos : 182 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1/F /Übersc hrift 1: F ehler- und Hi nwei smel dungen @ 33\mod_1370532120417_75.doc x @ 1787729 @ 3 @ 1 Error and Information Messages Pos : 183 /Tec hnisc he D okumentati on/Hebetec hni k/Arc hi v/08 Sc her en-H ebebühnen/0001 Scheren-H ebebühnen All e/Inhal te/Inhalt: H S0812 F ehl ermel dungen (ERR OR) @ 25\mod_1316162417785_75.doc x @ 1050563 @ @ 1 Error messages are displayed with the red lamp lighting constantly and the yellow lamp flashing...
  • Page 49 Code no. Description Cause Status of Enable monitoring reveals that either the enable contact is blocked (signal despite de- Enable monitoring error energized enable relay) or the enable relay is defective (no signal despite energized relay). Plug-in memory defective Plug-in memory module not present or defective. (MAH SPI FL) Internal keypad PCB does not respond.
  • Page 50 Code no. Description Cause Ceiling light barrier Ceiling light barrier triggered during raising motion. Emergency stop Emergency stop switch is on. Measuring head not in parking position during lowering Measuring head position motion. PMS cover not closed PMS cover not properly closed. Longitudinal light barrier interrupted during lowering Longitudinal light barrier motion.

  • Page 51: Special Programs

    Pos : 186 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1/S/Ü bersc hrift 1: Sonderpr ogramme @ 30\mod_1364226983671_75.doc x @ 1730023 @ 1 @ 1 Special Programs Pos : 187 /Tec hnisc he D okumentati on/All e Ger äte/01/Ü berschriften/Ü berschriften 1.1/S/Ü bersc hrift 1.1: Sonderpr ogramme ohne Ser vice-M ode @ 30\mod_1364227043825_75.doc x @ 1730067 @ 3 @ 1 14.1 Special Programs without Service Mode Pos : 188 /Tec hnisc he D okumentati on/Hebetec hni k/08...

  • Page 52: Special Programs In Service Mode

    14.2 Special Programs in Service Mode Pos : 190 /Tec hnisc he D okumentati on/Hebetec hni k/08 Scheren-Hebebühnen/2901 DUO CM /TH/Inhalt: 0829 Sonderpr ogramme i m Ser vic e-Mode (Funkti onsübersic ht.png) @ 35\mod_1385714085413_75.doc x @ 1861537 @ 1333 @ 1 These instructions are valid for software version V1.02.009 or higher, if not stated differently.
  • Page 53 14.2.1 Saving the Maximum Lifting Height 1 Raise the lift with the [UP] button or the wheel free jack with the [WFJ-UP] button to the desired lifting height. If you only want to save the maximum lifting height of the lift, lower the WFJ completely before raising the lift.
  • Page 54 a) Referencing the Lift at the Top 1 Raise the lift with the [UP] button and the wheel free jack with the [WFJ-UP] button to the mechanical stop. 2 Main switch OFF. (NOTE: By switching off you also exit the service mode!) 3 Wait for approx.
  • Page 55 [UP] Button With the [UP] button: • the pump is switched on • the latches are unlocked (not for WFJ) • the seat valve of the selected lifting unit is opened The lifting unit is raised up to the maximum difference and then automatically switches off (if the height measuring systems function).

  • Page 56: Company Information

    Pos : 193 /Tec hnisc he D okumentati on/All e Ger äte/Inhalte/Inhal t: Fir men-Infor mati on MAH A @ 42\mod_1422267670099_75.doc x @ 2188049 @ @ 1 © MAHA Maschinenbau Haldenwang GmbH & Co. KG Legal notice based on ISO 16016: The reproduction, distribution and utilization of this document as well as the communication of its contents to others without explicit authorization is prohibited.

This manual is also suitable for:

Duo cm 4.2 uDuo cm 5.0 aDuo cm 5.0 uR-as40cm aR-as40cm baR-as50cm a ... Show all

Table of Contents