Advertisement
Advertisement
Table of Contents
Related Manuals for OneTech NT10-101-MP-G11
Summary of Contents for OneTech NT10-101-MP-G11
- Page 1 NT10-101 РУССКИЙ v.2.0 MANUAL GRAVITY SPRAY GUN MANUAL INSTRUCTION NT10-101-MP-G11 NT10-101-MP-G12 NT10-101-MP-G13 NT10-101-MP-G14 NT10-101-MP-G15 NT10-101-MP-G17 NT10-101-HVLP-G11 NT10-101-HVLP-G12 NT10-101-HVLP-G13 NT10-101-HVLP-G14 NT10-101-HVLP-G15 NT10-101-HVLP-G17...
- Page 2 NT10-101 ENGLISH v.2.0 ATTENTION! PLEASE READ THIS MANUAL BEFORE USING THE SPRAY GUN (TOOL). IMPROPER USE OF TOOL MAY CAUSE INJURY AND/OR PROPERTY DAMAGE! ONLY QUALIFIED AND SPECIALLY TRAINED PERSONNEL FAMILIED WITH THESE INSTRUCTIONS IS ALLOWED TO USE AND MAINTENANCE OF THE TOOL. This manual contains description, safety rules and all the information necessary for the correct use of the spray gun.
-
Page 3: Operating Principle
If there is any doubt regarding the suitability of a specific material, contact your ONETECH Distributor or ONETECH direct. OPERATING PRINCIPLE ✓... -
Page 4: Technical Specification
EXAMPLE OF AIR SUPPLY SYSTEM TECHNICAL SPECIFICATION Spray width, Nozzle size, Air Pressure, Air Consumption, Fluid Output, Weight, Model Air Cap ml/min ± 20 mm NT10-101-MP-G11 NT10-101-MP-G12 NT10-101-MP-G13 2.0 – 2.5 NT10-101-MP-G14 NT10-101-MP-G15 NT10-101-MP-G17 NT10-101-HVLP-G11 NT10-101-HVLP-G12 NT10-101-HVLP-G13 HVLP NT10-101-HVLP-G14 NT10-101-HVLP-G15... -
Page 5: Troubleshooting Guide
NT10-101 ENGLISH v.2.0 TROUBLESHOOTING GUIDE FLUTTERING Possible Cause Solution Insufficient material in cap Refill material Dry or worn fluid needle packing set or loose fluid needle Lubricate or replace fluid needle packing set or tighten fluid packing screw needle packing screw Loose or damaged fluid nozzle Tighten or replace fluid nozzle CRESCENT... - Page 6 NT10-101 v.2.0...
- Page 7 NT10-101 v.2.0 Description Part No. Description Part No. Air cap set MP Connector washer NT10S-049 12-2 NT10S-065 Air cap set HVLP Air connector NT10S-050 NT10S-030 Fluid nozzle (1.1) Air adjusting set NT10S-051 NT10S-031 Fluid nozzle (1.2) Locking ring NT10S-052 NT10S-032 Fluid nozzle (1.3) Trigger stud NT10S-053...
- Page 8 NT10-101 v.2.0...
Need help?
Do you have a question about the NT10-101-MP-G11 and is the answer not in the manual?
Questions and answers