Cisco AIR-ANT5195P-R - Aironet Antenna User Manual page 8

Installing the Antenna
Position the antenna on the mounting plate.
Step 6
Place the screw cap washers onto the four #8-32 x 1-½-in. machine screws.
Step 7
Install the screws through the antenna mounting plate and install the #8 nuts.
Step 8
Tighten the #8 screws and nuts with a #2 Phillips screwdriver and an 11/32-in. (9-mm) wrench.
Step 9
Do not overtighten the nuts. You could damage the antenna.
Caution
Install the screw caps onto the screw cap washers.
Step 10
Route the antenna cable to the wireless device.
Step 11
Note
Cisco Aironet 9.5-dBi Patch Antenna (AIR-ANT5195P-R)
8
Cisco recommends grounding the antenna. See the
for details.
"Grounding the Antenna" section on page 11
78-16671-01