Software Settings - Slee CRYOSTAT MEV Operating Manual

8.4 Software settings

Software settings and feed:
Press MENU ENTER, to open the settings menu.
To move down in the main menu list, press >FAST<.
To move up in the main menu list, press <FAST>.
To change values, select a setting. Press MENU ENTER.
to open the setting. Change entries by pressing + or -.
Store new settings by pressing MENU ENTER.
Press ESC, to return to the main menu.
Please note the LOCK function:
The LOCK function can be activated in the basic settings
by pressing ESC for 2 sec. You end the LOCK function
by pressing ESC again for a longer time.
i
Manual_MEV_MEV+_2024-06-001.00_EN.docx
LOCK function: All functions and operation are blocked. Exceptions to this are the regulation
of the chamber temperature, edge heating, automatic defrosting and automatic disinfection.
During disinfection, any pending query is held back until the LOCK function is ended.
> Chamber temp.
Quickfreeze
UV disinfection
Light
Retraction
Start defrost
Contrast
> TIME
> Light
Light duration
Chamber incr
Retraction
Light duration
> Chamber incr
Retraction
Start defrost
Time TUE 13:05:05
CUT: 7 µm
Cha: 22 °C (25)
Status:OK
***LOCKED***
-20 °C
Off
Auto
5 µm
TUE 13:05:05
Auto
10 m
-15 °C
5 µm
10 m
-15 °C
5 µm
Trim: 19µm
QF: 0
0000
23