SARAH ELLISON BLOCK FLOOR MIRROR Assembly Instructions

CARE INSTRUCTIONS
With a little care you can prolong the life of your mirror. The following
information is only intended as a general guideline. Please follow the
instructions to ensure maximum longevity of your SARAH ELLISON. mirror.
Timber is responsive to its environment, be mindful that heat and moisture
can cause movement and cracks in joints and damage lacquer.
• Avoid exposing wood to direct heat and sunlight
• Maintain consistent humidity in the space to prevent excessive
expansion and contraction of wooden pieces and joints
• Over time, air and sunlight will change the colour of natural wood.
Occasionally rotate the items placed on your wood furniture to allow
a more uniform colour to develop.
• Avoid using abrasives, and harsh chemicals cleaners
• Do not place hot items such as hair straighteners directly onto the
timber surface. Ensure tivets or surface protectors such as placement
are used.
• Keep rough and sharp objects away from wood surfaces.
• Apply protective pads to the undersides of items being displayed on.
sarahellison.com.au page 4 | 4
BLOCK FLOOR MIRROR
ASSEMBLY INSTRUCTIONS
Thank you for purchasing the SARAH ELLISON Mirror. This document lists
the contents included in your delivery. Please take the time to identify the
hardware, as well as the individual components of this product. As you
unpack and prepare for assembly, place the contents on a carpeted or
padded area to protect them from damage.
HARDWARE
2 x 5/16x 100m Bolt Screws
2 x size 14 Washer
2 x Spring Washer
2 x Nuts
2 x Cover Stickers / Plugs
TOOLS REQUIRED
Allen Key (Provided)
PEOPLE REQUIRED FOR
ASSEMBLY
A minimum of two people are
required to assemble this product
ESTIMATED TIME OF ASSEMBLY
30 minutes
CUSTOMER SERVICE
For Australian customer service contact : info@sarahellison.com.au
For any international customer service inquires please contact the retailer of purchase
page 1 | 4 sarahellison.com.au