Related Manuals for POSIFLEX EB-101EK
Summary of Contents for POSIFLEX EB-101EK
- Page 1 EB-101EK Mounting Bracket for Ingenico Payment Device iCT-250 Quick Installation Guide Package Contents EB-101EK Mounting Bracket Kit…..(x 1) Ingenico Payment Device iCT-250 (for EK Series) Ingenico Payment Device iCT-250 EB-101EK Ver. A0...
- Page 2 #6/32-10L Screws (x 5): for ivory plate bracket #6/32-12L Screws (x 2): for two side brackets and ivory plate bracket #6/32-8L Screws (x 4): for EB-101EK mounting bracket kit and EK touch monitor EB-101EK Mounting Bracket for Ingenico Payment Device iCT-250 1.
- Page 3 2. Remove the cable cover with you thumb like the below picture.
- Page 4 3. Route the payment cable in the direction as shown in the below picture. 4. Put the inside support bracket onto the rear side of the payment and make sure the hoot insert to the slot correctly like the below picture. Fix the inside support bracket to the payment with one #6/32-15L screw.
- Page 5 5. Place the cradle bracket to the rear side of the payment, and make sure the cable pass through the cable exit on the side like the below picture. Then fix the cradle bracket with one M3 flat head screw. Cable Exit...
- Page 6 6. Place the ivory plate bracket onto the cradle bracket. Align the two positioning holes with the two positioning points first, and then fix the ivory plate bracket with five #6/32-10L screws. Positioning Point Positioning Point 7. Try to straighten the cable and put it into the cable passage. Make sure the cable avoid the screw holes.
- Page 7 8. Place the two side brackets together, and align the screw holes on top side and bottom side like the below picture. Align the screw holes.
- Page 8 9. Place the two side brackets onto the ivory plate bracket like the below picture. 10. Fix the two side brackets to the ivory plate bracket with two #6/32-12L screws on both top side and bottom side.
- Page 9 11. To unlock the front door, turn the key counterclockwise to around 90 degrees. See the images below. 90゜ 12. Once the front door is unlocked, the user is able to open the front door. See the images below.
- Page 10 13. 1) Lift the lever on the left side of the touch monitor, and then 2) gently tilt the touch monitor up. 3) Then use the touch monitor support bracket to support the touch monitor. Please refer to the images below. 1) Lift the lever.
- Page 11 3) Use the touch monitor support bracket to support the touch monitor.
- Page 12 14. There are two hex nuts on the right side of the kiosk. Loosen the two hex nuts and then remove the side cover bracket.
- Page 13 15. Fix the ivory metal plate with iCT-250 terminal onto the rear side of the touch monitor with four #6/32-8L screws. Be careful to avoid the payment cable when screwing.
- Page 14 Depending on the size of touch monitor, the screw hole positions are different. 16. Installation completed. ※ The product information and specifications are subject to change without prior notice. To get more detailed information of EB-101EK, please contact the service team of Posiflex.
Need help?
Do you have a question about the EB-101EK and is the answer not in the manual?
Questions and answers