Heat Operation - Haier HSU-18HVE03 Operating Manual

Operation

Heat Operation

Remote controller
TEMP
HEALTH FAN
SWING
MODE H.AIR.
SLEEP FRESH
SET
CLOCK
TIMER
LOCK LIGHT CODE RESET
1. Unit start
Press on/off button ("
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Then Select HEAT operation
On the displaying board,colorful displaying bar will be red
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1
rapidly
Every time the button is pressed, temp.setting
decrease 1
rapidly
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
Air conditioner is running under displayed fan speed
IN HEAT mode, warm air will blow out after a short period
of the time due to cold-draft prevention function.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.
5.Unit stop
Press on/off button ("
14
") on the remote controller, unit starts.
AUTO COOL DRY
o
C,if kept depressed, it will increase
o
C,if kept depressed, it will decrease
LOW
MED
"), the unit stops.
FAN HEAT
HI AUTO