Dry Operation - Haier HSU-18HVE03 Operating Manual

Operation

Dry Operation

Remote controller
TEMP
HEALTH FAN
SWING
MODE H.AIR.
SLEEP FRESH
SET
CLOCK
TIMER
LOCK LIGHT CODE RESET
COOL operation starts when room
temp.is higher than temp.setting.
o
Temp.setting+2 C
Temp.setting
On reaching temp.setting +2
unit will run in mild DRY mode.
1. Unit start
Press on/off button ("
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Then Select DRY operation
On the displaying board,colorful displaying bar will be
light blue
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1
rapidly
Every time the button is pressed, temp.setting
decrease 1
rapidly
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
Air conditioner is running under displayed fan speed.
Ultra-low air flow
In DRY mode, when room temperature becomes
lower than temp.setting+2
at LOW speed regardless of FAN setting.
5.Unit stop
o
C
Press on/off button (" "), the unit stops.
") on the remote controller, unit starts.
AUTO COOL
o
C,if kept depressed, it will increase
o
C,if kept depressed, it will decrease
LOW
MED
o
C,unit will run intermittently
12
DRY FAN HEAT
HI AUTO