Table of Contents
Advertisement
Operation
Dry Operation
Remote controller
COOL operation starts when room
temp.is higher than temp.setting.
o
Temp.setting+2
C
Temp.setting
On reaching temp.setting +2
unit will run in mild DRY mode.
All manuals and user guides at all-guides.com
1. Unit start
Link with electronic power.
Press ON/OFF on the remote controller, unit starts.
The liquid crystal will display the working state of last
time (Except Timer, Sleep, Power/Soft and Health
airflow).
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Then Select DRY operation
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1
rapidly
Every time the button is pressed, temp.setting
decrease 1
rapidly
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
Air conditioner is running under displayed fan speed.
In DRY mode, when room temperature becomes
Ultra-low air flow
lower than temp.setting+2
at LOW speed regardless of FAN setting.
5.Unit stop
Press ON/OFF button, the unit stops.
o
C
AUTO
COOL
o
C,if kept depressed, it will increase
o
C,if kept depressed, it will decrease
LOW
MED
o
C,unit will run intermittently
11
DRY
FAN
HEAT
HI
AUTO
Advertisement
Table of Contents
