Operation - Haier HSU-09RQ03 Operatiing Manual

Operation

Comfortable SLEEP
Before going to bed at night, you can simply press
the SLEEP button and unit will bring you a sound
sleep in selected mode.
In COOL mode
One hour after SLEEP mode starts, temp. will
o
become 1 C higher than temp. setting. After
running for another 1 hour, temp. rises by 1
further. Unit will run for 6 hours then stops
automatically. Temp. is higher than temp.
setting so that room temp. won't be too low
In HEAT mode
One hour after SLEEP mode starts, temp. will
o
become 2 C lower than temp. setting. After
running for another 1 hour, temp. decreases
o
by 2 C further. Unit will run for 3 hours at this
temp. then increases another 1
automatically 3 hours later. Temp. is lower
than temp. setting so that room temp. won't
be too high for your sleep.
(As shown in Fig .2)
Power Failure Resume Function
If the unit is started for the first time, the
compressor will not start running unless 3
minutes have elapsed. When the power
resumes after power failure, the unit will run
automatically, the power indicator lights up, and
3 minutes later the compressor starts running
with the indicator lighting up.
Note:
In AUTO mode, unit will run in SLEEP
function according to operation mode.
In FAN mode, comfortable sleep is not
available.
o
C
SLEEP operation starts
o
C and stops
SLEEP mode starts
14
AM
ON/OFF TEMP
MODE SET
FAN TIMER
SWING CLOCK
SLEEP HEALTH
LOCK RESET
SLEEP operation stops
Approx. 6 hrs
1 hr o
Rises 1 C
o
1 hr Rises 1 C
Temp. setting
Fig.1
Temp. setting
o
decreases 2 C
1 hr
o
decreases 2 C
1 hr
Approx. 3 hrs
Rises 1
3 hrs
SLEEP mode stops
Fig.2
Unit stop
Unit stop
o
C