In these operating instructions, the designation “the tool” always refers to the PMP 45 point laser. Always keep these operating instructions to- gether with the tool. Component parts 1...
When the self-leveling range is exceeded, the laser beam blinks to warn the user. The PMP 45 is characterized by its ease of operation and use, its rugged plastic casing and ease of transport due to its compact dimensions and light weight.
The batteries are almost exhausted. every 10 seconds. The laser beam blinks rapidly. The tool cannot level itself. 2.4 Items supplied with the point laser (cardboard box version) PMP 45 point laser Soft pouch Batteries Operating instructions Manufacturer’s certificate 3 Accessories...
Although the tool is designed for the tough condi- sonnel or when used not as directed. tions of jobsite use, as with other optical and elec- c) To avoid the risk of injury, use only genuine Hilti tronic instruments (e.g. binoculars, spectacles, accessories and additional equipment.
(burns). under such conditions or if you are unsure. Likewise, Hilti h) Do not attempt to open the batteries and do not cannot rule out the possibility of interference with other subject them to excessive mechanical stress.
7 Operation 7.3.1.1 Calculation of accuracy (d1 + d2) [mm] RH [m] (d1 + d2) [inch] 7.1 Operation RH [ft] 7.1.1 Switching the laser beams on The result (R) provided by this formula (RH = room height) Press the on/off button once. refers to the tool’s accuracy “in mm at 10 m”...
NOTE Do not use any other liquids as these may 8.4 Hilti calibration service damage the plastic components. We recommend that the tool is checked by the Hilti cal- Observe the temperature limits when storing your ibration service at regular intervals in order to verify its equipment.
Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back old tools or appliances for recycling.
We declare, on our sole responsibility, that this product Deutschland complies with the following directives and standards: until 19th April 2016: 2004/108/EC, from 20th April 2016: 2014/30/EU, 2011/65/EU, EN ISO 12100. Hilti Corporation, Feldkircherstrasse 100, FL‑9494 Schaan Paolo Luccini Edward Przybylowicz Head of BA Quality and Process Man-...
Need help?
Do you have a question about the PMP 45 and is the answer not in the manual?
Questions and answers