Advertisement

FLEXIDOME indoor 3100i | FLEXIDOME indoor
3100i IR | FLEXIDOME outdoor 3100i IR
NDI‑3702‑A | NDI‑3703‑A | NDI‑3702‑A‑GOV | NDI‑3703‑A‑GOV |
NDI‑3702‑AL | NDI‑3703‑AL | NDI‑3702‑AL‑GOV | NDI‑3703‑AL‑GOV
| NDE‑3702‑AL | NDE‑3703‑AL | NDE‑3702‑AL‑GOV |
NDE‑3703‑AL‑GOV
en
User manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FLEXIDOME indoor 3100i and is the answer not in the manual?

Questions and answers

Summary of Contents for Bosch FLEXIDOME indoor 3100i

  • Page 1 FLEXIDOME indoor 3100i | FLEXIDOME indoor 3100i IR | FLEXIDOME outdoor 3100i IR NDI‑3702‑A | NDI‑3703‑A | NDI‑3702‑A‑GOV | NDI‑3703‑A‑GOV | NDI‑3702‑AL | NDI‑3703‑AL | NDI‑3702‑AL‑GOV | NDI‑3703‑AL‑GOV | NDE‑3702‑AL | NDE‑3703‑AL | NDE‑3702‑AL‑GOV | NDE‑3703‑AL‑GOV User manual...
  • Page 3: Table Of Contents

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Table of contents | en 3100i IR | FLEXIDOME outdoor 3100i IR Table of contents Safety and security information Safety message explanation Safety precautions Important safety instructions Notices Browser connection System requirements Establishing the connection...
  • Page 4 FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Table of contents 3100i IR | FLEXIDOME outdoor 3100i IR 5.5.1 Storage Management 5.5.2 Recording Profiles 5.5.3 Maximum Retention Time 5.5.4 Recording Scheduler 5.5.5 Recording Status 5.5.6 Recording Statistics 5.5.7 Image Posting 5.5.8...
  • Page 5: Safety And Security Information

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Safety and security information | en 3100i IR | FLEXIDOME outdoor 3100i IR Safety and security information Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings before operating the device.
  • Page 6: Notices

    Notice! Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information.
  • Page 7 Bosch Security Systems Inc 130 Perinton Parkway 14450 Fairport, NY, USA For more information please contact the nearest Bosch Security Systems location or visit: www.boschsecurity.us Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
  • Page 8 FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Safety and security information 3100i IR | FLEXIDOME outdoor 3100i IR Hazardous substance table according to SJ/T 11364-2014 O: The content of such hazardous substance in all homogeneous materials of such component is below the limit defined in GB/T 26572...
  • Page 9 FLEXIDOME indoor 3100i | FLEXIDOME indoor Safety and security information | en 3100i IR | FLEXIDOME outdoor 3100i IR Bosch assumes no liability whatsoever for any damage caused by operating its products with outdated software components. Old electrical and electronic equipment This product and/or battery must be disposed of separately from household waste.
  • Page 10: Browser Connection

    If you cannot connect, the unit may have reached its maximum number of connections. Depending on the device and network configuration, each unit can have up to 50 web browser connections, or up to 100 connections via Bosch Video Client or BVMS. Password protection in camera The device is password-protected.
  • Page 11 FLEXIDOME indoor 3100i | FLEXIDOME indoor Browser connection | en 3100i IR | FLEXIDOME outdoor 3100i IR – Minimum of 1 special character These special characters are not allowed: '@', '&', '<', '>', ':', '+' When you use Configuration Manager to access your device for the first time, you must set the initial password of the device in Configuration Manager.
  • Page 12: System Overview

    Click this icon to configure the device. Dashboard Click this icon to see detailed system information. Links Click this icon to navigate to the Bosch download store. Logout Click this icon to log out of the device. Click this icon to get context-sensitive help for the page you are browsing.
  • Page 13: Dashboard

    FLEXIDOME indoor 3100i | FLEXIDOME indoor System overview | en 3100i IR | FLEXIDOME outdoor 3100i IR Make the desired changes. Click the Set and Reboot button. The camera reboots and the changed settings are activated. Dashboard The Dashboard page is used to display detailed information about the device.
  • Page 14: Operation Via The Browser

    FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Operation via the browser 3100i IR | FLEXIDOME outdoor 3100i IR Operation via the browser Live page After the connection is established, the Live page is initially displayed. It shows the live video image on the right of the browser window.
  • Page 15: Playback Page

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Operation via the browser | en 3100i IR | FLEXIDOME outdoor 3100i IR – if the CPU load is too high, change the VCA settings, – if the network load is too big, change the encoder profile to reduce bitrate.
  • Page 16: Searching For Recorded Video

    FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Operation via the browser 3100i IR | FLEXIDOME outdoor 3100i IR 4.2.2 Searching for recorded video Expand the Search group on the left side of the browser. – To limit the search to a particular time range, enter the date and times for the start and stop points.
  • Page 17 FLEXIDOME indoor 3100i | FLEXIDOME indoor Operation via the browser | en 3100i IR | FLEXIDOME outdoor 3100i IR At the bottom of the page, locate the Export button Click the Export button Select a location in your hard drive to store the file Bosch Security Systems B.V.
  • Page 18: Configuration

    Certificate. A check mark in this check box indicates that at least one certificate is loaded onto the device. The Trusted certificate is a root certificate for Bosch Security Systems that proves that the device meets the following criteria: –...
  • Page 19: Date/Time

    3100i IR | FLEXIDOME outdoor 3100i IR – It has not been tampered with. The Trusted certificate is issued by Escrypt. Escrypt is a Bosch company and Certificate Authority (CA). – Active Directory server (AD FS). A check mark in this check box indicates that the device uses an active directory server.
  • Page 20: Web Interface

    FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR Note: It is important that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording. Device time zone Select the time zone in which the system is located.
  • Page 21 FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR Show VCA metadata When video content analysis (VCA) is activated, additional information is displayed in the live video stream. With the MOTION+ analysis type, for example, the sensor fields in which motion is recorded are marked with yellow rectangles.
  • Page 22: Live' Functions

    FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR JPEG quality You can specify the quality at which the JPEG images appear on the Live page. This option is only available if JPEG resolution is not set to Resource based.
  • Page 23: Dyndns

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR Login Enter your login name for the account server. Password Enter the password that gives access to the account server. Click Check to confirm that it is correct.
  • Page 24 FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR Sensor mode The sensor mode specifies the base resolution and frame rates for the image quality settings. Fast moving scenes use more frame rates for better image quality than slow moving scenes.
  • Page 25: Display Stamping

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR – IR-corrected lens – Click the checkbox to activate or deactivate IR correction function. The setting of the lens mode is crucial to ensure optimal performance. In daylight operation, the IR-corrected mode is not required.
  • Page 26 FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR Camera name stamping – Position Select the position of the camera name overlay in the drop-down box. It can be displayed at the Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to Off for no overlay information.
  • Page 27: Positioning

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR If you have enabled the Transparent background option, the background color is not displayed in the OSD. Alarm mode stamping – Position Select the position of the camera name overlay in the drop-down box. It can be displayed at the Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to Off for no overlay information.
  • Page 28 FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR The height of the camera must always be entered manually. Whenever possible, roll angle and tilt angle are provided by the camera itself. The focal length is provided, if the camera has a built-in lens.
  • Page 29 FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR Refer to the Configuration Manager Online help content to learn more about assisted calibration methods. Calibrating cameras using the Sketch-based calibration window To determine non-automatically set values:...
  • Page 30: Color

    FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR Cartesian The Cartesian coordinate system describes each point in the space by a combination of the position on three orthogonal axes X, Y and Z. A right-handed coordinate system is used, where X and Y span the ground plane and Z describes the elevation of the ground plane.
  • Page 31: Alc

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR – Sodium lamp auto mode allows the device to continually adjust for optimal color reproduction in an environment with sodium vapor light sources (street lighting).
  • Page 32: Illuminator

    5.4.6 Illuminator Illuminator function (Only applicable to FLEXIDOME indoor 3100i IR and FLEXIDOME outdoor 3100i IR: NDI-3702-AL, NDI-3703-AL, NDE-3702-AL, NDE-3703-AL) The information about the installed illuminator module is displayed on top of this page. The device automatically adapts the IR beam angle to match the field of view of the lens.
  • Page 33: Encoder Streams

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR Temporal noise filtering Adjusts the Temporal noise filtering level between -15 and +15. The higher the value, the more noise filtering. Spatial noise filtering Adjusts the Spatial noise filtering level between -15 and +15.
  • Page 34 The Active profile follows the scheduled profiles under Recording Profiles. Please refer to section Recording Profiles. This behavior is only applicable when using Bosch recording solutions, including edge recording or VRM recording. Third-party recording solutions might use the Non-recording profile.
  • Page 35: Encoder Statistics

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR If no edge recording or VRM recording is active, the active profile is managed via the drop- down of Non-recording profile. If edge recording or VRM recording is active, the active profile is managed via the menu in Recording Profiles.
  • Page 36: Recording

    FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR To change the shape of a zone, place the cursor over the edge of the zone, hold down the mouse button and drag the edge of the zone to the required position.
  • Page 37: Recording Profiles

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR This function enables recording to the iSCSI target. If there is a network disconnection, the video is recorded to the local storage. When the network is recovered, the video recorded to the local storage is transferred to the iSCSI target and completes the missing information.
  • Page 38 FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR – To copy the currently visible settings to other profiles, click Copy Settings. A window opens to select the target profiles for the copied settings.
  • Page 39: Maximum Retention Time

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR Export to account To send standard H.264 or H.265 files to the target address, select an account and check Export from memory. If the target has not yet been defined, click Configure accounts to jump to the Accounts page where the server information can be entered.
  • Page 40: Recording Status

    FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR To delete a user-defined holiday, click on the trashcan of the respective holiday. Click Set to apply the changes. Time periods Change the names of the recording profiles listed in the Time periods box.
  • Page 41: Sd Card Status

    – A warning through the Video Management System If a SD card is not installed, ‘SD card not found’ is shown. Notice! Bosch recommends the use of industrial micro SD cards with health monitoring. Alarm 5.6.1 Alarm Connections In the event of an alarm, the unit can automatically connect to a pre-defined IP address. The unit can contact up to ten IP addresses in the order listed until a connection is made.
  • Page 42 FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR Auto-connect Select On to automatically re-establish a connection to one of the previously specified IP addresses after each reboot, connection breakdown, or network failure.
  • Page 43: Video Content Analysis (Vca)

    Detection of movement can be used to trigger an alarm and to transmit metadata. Various VCA configurations can be selected and adapted to your application, as required. Configure the VCA setting in the Bosch Configuration Manager. 5.6.3 Alarm Email Alarm states can be documented by e-mail.
  • Page 44: Alarm Task Editor

    Network Notice! Bosch recommends the use of industrial micro SD cards with health monitoring. 5.7.1 Network Services This page shows an overview of all available network services. Use the checkbox to activate or deactivate a network service.
  • Page 45 FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR IPv4 Automatic assignment (DHCP) If the network has a DHCP server for the dynamic assignment of IP addresses, select On to automatically accept the DHCP-assigned IP address.
  • Page 46: Advanced

    FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR To limit connections to SSL encryption, set the Off option in the HTTP browser port and the RCP+ port. This deactivates all unencrypted connections allowing connections on the HTTPS port only.
  • Page 47: Network Management

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR Password [EAP-MD5] Enter the password that is stored in the RADIUS server. Certificates [EAP-TLS] If any certificates are already uploaded at the client level or at the server level, they show here.
  • Page 48: Multicast

    FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR Write community Type the password for Write community to allow the exchange of data between connected devices. SNMP traps You can select which traps are to be sent.
  • Page 49 FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR A special IP address from 225.0.0.0 to 239.255.255.255 (class D address) must be configured for multicast operation in a multicast-enabled network. The multicast address can be the same for multiple streams, however, it is necessary to use a different port in each case.
  • Page 50: Ipv4 Filter

    FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR IGMP version Set the multicast IGMP version to comply with the device. Click Set to apply the changes. Some changes only take effect after the unit is rebooted. In this case, the Set button changes to Set and Reboot.
  • Page 51: Licenses

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Configuration | en 3100i IR | FLEXIDOME outdoor 3100i IR Configuration Save configuration data for the device to a computer and load saved configuration data from a computer to the device. To load configuration data from the computer to the device: Click Browse..
  • Page 52: Logging

    FLEXIDOME indoor 3100i | FLEXIDOME indoor en | Configuration 3100i IR | FLEXIDOME outdoor 3100i IR Note: You can only delete certificates that you have added; you cannot delete the default certificate. Download a certificate Click on the download icon and a window opens with base64 encoded text of the certificate.
  • Page 53: Troubleshooting

    FLEXIDOME indoor 3100i | FLEXIDOME indoor Troubleshooting | en 3100i IR | FLEXIDOME outdoor 3100i IR Troubleshooting Physical reset button You may need to complete a hardware reset if you have the following issues: – You can power up the camera but cannot log on to the camera using the web browser.
  • Page 54: Appendices

    – Repair & Exchange – Product Security Bosch Building Technologies Academy Visit the Bosch Building Technologies Academy website and have access to training courses, video tutorials and documents: www.boschsecurity.com/xc/en/support/training/ 2024-03 | V01 | DOC Bosch Security Systems B.V. User manual...
  • Page 56 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2024 Building solutions for a better life 202403121218...

Table of Contents

Save PDF