Subscribe to Our Youtube Channel
Related Manuals for MasterCraft X-612
Summary of Contents for MasterCraft X-612
- Page 1 This Owner's Manual is provided and hosted by Appliance Factory Parts. MASTERCRAFT X-612 Owner's Manual Shop genuine replacement parts for MASTERCRAFT X-612 Find Your MASTERCRAFT Extractor Parts - Select From 4 Models -------- Manual continues below --------...
-
Page 2: Safety Operation
Operating instructions must always be have occurred. 2) 5 Ft Stainless Steel Wand and available for the operator. This extractor 12” Nozzle w/2 Spray Jets may only be operated by persons who HESE NSTRUCTIONS X-612 Manual - PN 221775- Printed in USA 09/08/10... -
Page 3: Maintenance
MPORTANT ARNING When using this extractor, basic precautions AFETY should always be followed, including the following: NSTRUCTIONS 1) DO NOT leave extractor when 7) DO NOT pull or carry by the cord DO 13) DO NOT use where anesthetics or plugged in. - Page 4 ANGER ROUNDING Improper use of the grounding plug can result in a NSTRUCTIONS risk of electric shock. Electrical equipment must be ground- tor and grounding plug. The plug must If repair or replacement of the cord or ed. If it should malfunction or break- be inserted into an appropriate outlet plug is necessary, DO NOT connect the down, grounding provides a path of...
- Page 5 In order to avoid damage to the carpet 3) Carpet does not have a backing that is HECK ARPET during the cleaning operation check for the sensitive to water (Jute or Jute Blends). following: EFORE 4) Test carpet to see if it is color-fast. 1) Carpet is secured with adhesive that is LEANING water resistant.
- Page 6 This extractor is designed to be safe when These instructions are for your protections used to perform cleaning functions as and information PLEASE READ CAREFUL- specified. Should damage occur to electri- LY! Failure to follow the precautions or XTRACTOR cal parts, the unit should NOT be used instructions could result injury or damage until the damage is repaired by the manu- to the user and/or extractor.
- Page 7 OTTOM ARTS IST AND RAWING __________________________________ Part Description Part __________________________________ Upper And Lower Housing 440396 Bolt 205532 Lock Washer 210218 Lock Nut 210153 Lanyard 209929 Rivet Back Up Washer 440515 Cord Retainer 445843 25" 12 x 3 Yellow Cord 445606 Green Rocker Switch 445231 210625...
- Page 8 & M OTOR & RAWING ARTS ____________________________________ ____________________________________ Part Description Part Part Description Part ____________________________________ ____________________________________ Pump-In-Line Hose 443212 Left Side Latch 442224 ¼ x NPT x Barb 90° Fitting 443263 Rivet Back Up Washer 440515 150 PSI Pump 241385 Exhaust Flange 443565 2 Stage Vacuum Motor...
- Page 9 1) Check for clogged jets and clean. 2) Loose or kinked hose. 2) Check and replace hose if necessary. ARNING Service and repairs, should only be performed by an authorized service center. X-612 Manual - PN 221775- Printed in USA 09/08/10...
Need help?
Do you have a question about the X-612 and is the answer not in the manual?
Questions and answers