MasterCraft X-405 Operation & Maintenance Manual

MasterCraft X-405 Operation & Maintenance Manual

Advertisement

R
EAD
I
NSTRUCTIONS
B
EFORE
R
A
I
EAD
LL
This extractor will afford you many years of trouble-free oper-
ating satisfaction, provided it is given proper care. All parts
have passed rigid quality control standards prior to their being
assembled to produce the finished product.
Prior to packaging, this extractor was again inspected for
assurance of flawless assembly.
The manufacturer takes no responsibility for damages caused
to property or persons due to improper use of the extractor.
Operating instructions must always be available for the oper-
ator. This extractor may only be operated by persons who
have been fully trained and authorized to use it.
All information and specifications printed in this manual are
current at the time of printing. However, because of our pol-
icy of continual product improvement, we reserve the right
to make changes at any time without notice.
A
F
ND
OLLOW
, W
ARNINGS AND
U
T
SING
HIS
NSTRUCTIONS
S
T
AVE
S
AFETY
M
AINTENANCE
A
LL
C
AUTIONS
E
XTRACTOR
B
O
EFORE
Carefully check the shipping carton for signs of damage.
Remove the machine from the carton, if the machine is dam-
aged, notify the carrier immediately and request an inspec-
tion. Only a visual examination will reveal damage that may
have occurred.
Be sure to keep the carton, packing inserts, packing list and
carrier's receipt until the inspector has verified your claim.
Our liability ceases when the shipment is picked up by the car-
rier. We will furnish any information needed to expedite the
claim process.
Check carton contents to ensure all accessories are included
which are listed as follows:
1) 1
1
/
x 15 Ft Solution/Recovery Hose
2
2) 5 Ft Stainless Steel Wand and
12" Nozzle w/2 Spray Jets
I
HESE
NSTRUCTIONS
P
1
AGE
O
PERATION
X-405 C
E
This unit is intended for commercial use.
777 South Street
Newburgh, NY 12550-0606
(800) 835-7812
(845) 565-8850
(800) 752-6883
(845) 565-9392
Internet Address
mastercraftusa.com
techsupport@mastercraftusa.com
PERATING
X-405 Manual Printed in USA 07/16/07
&
M
ANUAL
ARPET
XTRACTOR
Address:
TEL:
FAX:
E-Mail:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X-405 and is the answer not in the manual?

Questions and answers

Summary of Contents for MasterCraft X-405

  • Page 1 However, because of our pol- icy of continual product improvement, we reserve the right 2) 5 Ft Stainless Steel Wand and to make changes at any time without notice. 12” Nozzle w/2 Spray Jets HESE NSTRUCTIONS X-405 Manual Printed in USA 07/16/07...
  • Page 2: Important Safety Instructions

    MPORTANT ARNING When using this extractor, basic precautions AFETY should always be followed, including the following: NSTRUCTIONS 1) DO NOT leave extractor when 7) DO NOT pull or carry by the cord DO 13) DO NOT use where anesthetics or plugged in.
  • Page 3: Grounding Instructions

    ROUNDING ANGER NSTRUCTIONS Improper use of the grounding plug can result in a risk of electric shock. Electrical equipment must be grounded. If If repair or replacement of the cord or it should malfunction or breakdown, plug is necessary, DO NOT connect the grounding provides a path of least resist- grounded wire to either flat blade termi- ance for electrical current to reduce the...
  • Page 4 1) Remove furniture from the area. Large 6] Connect the solution hose to the quick MPORTANT pieces can be moved to opposite end of disconnect coupling and insert vacuum the room from where you start cleaning. hose in to the plug-in sleeve. Push other ROCEDURES end of the vacuum hose onto wand and 2) Thoroughly vacuum carpet making sure...
  • Page 5: Set -U P & Operating Procedures

    It is recommended that you use a low Attach Cleaning Tool: & foaming chemical or a defoamer to elimi- nate foam build-up in the recovery tank and 1) Connect vacuum hose to the vacuum PERATING damage to the vacuum motor. If moisture intake and the extraction wand.
  • Page 6 Tank Bottom Parts List and Drawing ___________________________________ Part Description Part ___________________________________ Upper And Lower Housing 440396 Bolt 205532 Lock Washer 210218 Lock Nut 210153 Lanyard 209929 Rivet Back Up Washer 440515 Cord Retainer 445843 25" 12 x 3 Yellow Cord 445606 Green Rocker Switch 445231...
  • Page 7 Pump & Motor Parts List and Drawing ____________________________________ ____________________________________ Part Description Part Part Description Part ____________________________________ ____________________________________ Pump-In-Line Hose 443212 Left Side Latch 442224 ¼ x NPT x Barb 90° Fitting 443263 Rivet Back Up Washer 440515 60 PSI Pump 443271 Exhaust Flange 443565...
  • Page 8 1) Pump is pulsating. 1) Check for clogged jets and clean. 2) Loose or kinked hose. 2) Check and replace hose if necessary. ARNING Service and repairs, should only be performed by an authorized service center. X-405 Manual Printed in USA 07/16/07...

Table of Contents