Configuring Vlan Ids - HP NC320m - PCI Express Gigabit Server Adapter User Manual

Configuring VLAN IDs

If Active Path Failover, Fast Path Failover (with Cisco PVST+ set as the Spanning Tree Protocol), or Router
Path Failover are configured for a team, you can select the VLAN ID for validation and monitoring.
Before creating and editing VLANs, you should be aware that:
The NCU supports IEEE 802.1Q VLAN tagging only.
The NCU supports a VLAN identifier range of 1 to 4094.
Up to 64 VLANs can be defined for a team.
To create a VLAN for a team:
From the NCU Main window, select the team.
1.
Click VLAN (802.1Q). The VLAN tab appears.
2.
The VLAN tab shows all VLANs that currently exist for the team. The list includes both existing VLANs
and new VLANs that have been created but that have not yet been applied. Newly created VLANs
are applied by clicking OK on the Main window.
Using advanced networking features 30