Configuring Virus Throttle Parameters - HP NC320m - PCI Express Gigabit Server Adapter User Manual

If no inconsistencies are detected in the filter driver parameters, the Status tab appears. The Status
tab shows overall status, statistics, and delay queue information. Refer to "Monitoring Virus Throttle
status."
If inconsistencies are found, the following message appears.
Click OK to display the Configuration tab. Update the current settings for all active instances of the
3.
filter driver as needed. Refer to "Configuring Virus Throttle parameters (on page 17)."

Configuring Virus Throttle parameters

The Configuration tab shows the current delay queue and host settings and allows you to configure them
for all active instances of the Virus Throttle filter driver. Parameters cannot be set for individual instances
of the filter driver.
You can configure the following parameters:
Delay Queue Size. Controls the maximum number of delayed TCP or UDP connection requests in the
queue for each instance of the filter driver. Requests over the queue size are dropped. The default
setting is 200 delayed connection requests. The valid range is 1-1000.
Using Virus Throttle 17