Attach Other Devices - HP A6795A Installation Manual

Attach Other Devices

Attaching a Fibre Channel HBA to other Fibre Channel devices.
1. Be sure you have removed the Fibre Channel host bus adapter's optical port protector (if included).
2. Be sure you have attached a connector cable to the Fibre Channel host bus adapter. Align the slotted plug
with the keyed connector. Push the connector in until you hear it click.
3. Attach the free end of the cable to a compatible Fibre Channel device.
4. Reconnect the power cord, if necessary, and power up the system.
The following table lists the Fibre Channel cables that you can use with Fibre Channel Host Bus Adapters.
Be sure to use LC-LC or LC-SC cables for the A6795A. adapter.
Table 1-2 Cable Products
LC-LC
C7524A Fibre Channel Cable 2m LC 50/125 duplex M/M
C7525A Fibre Channel Cable 16m LC 50/125 duplex M/M
C7526A Fibre Channel Cable 50m LC 50/125 duplex M/M
C7527A Fibre Channel Cable 200m LC 50/125 duplex M/M
LC-SC
C7529A Fibre Channel Cable 2m LC-SC 50/125 duplex M/M
Optical
C7530A Fibre Channel Cable 16m LC-SC 50/125 duplex M/M
Optical
Adapter/Extenders
C7534A Fibre Channel Adapter SC F/F
Adapter Kit
C7540A Fibre Channel Adapter Kit: Includes 2m LC/SC Cable
and F/F extenders
Chapter 1
HP-UX Installation
Attach Other Devices
11