Page 1
4x51W MAX POWER STORM-555BT BLUETOOTH / USB / FM RECEIVER USER MANUAL 2-ZONE ÂÍÈÌÀÒÅËÜÍÎ ÏÐÎ×ÈÒÀÉÒÅ ÄÀÍÍÓÞ ÈÍÑÒÐÓÊÖÈÞ ÏÅÐÅÄ ÓÑÒÀÍÎÂÊÎÉ È ÝÊÑÏËÓÀÒÀÖÈÅÉ PLEASE READ CAREFULLY BEFORE USING...
Page 2
Copyright Copyright “ “, “ “ are registered trademarks. All rights reserved. This document, entirely or in any part of it, is prohibited to reproduce, as well as copy without the preliminary written permission of the manufacturer. All trademarks, logos and names of products used on the packaging and in this document are logos or registered trademarks of the respective companies.
Precautions User manual contains important security recommendations and information about the proper operation of the device. Please carefully follow all the instructions given in this guide. 1. When installing the device, avoid places with high temperature, humidity, or places where there is a lot of dust. 2.
Package and installation Open the package and make sure that inside are: 1. USB receiver - 1 pc. 2. Remote control - 1 pc. 3. Keys for removing the receiver - 2 pcs. 4. ISO - connector - 1 pc. 5.
Power connection 1. Make sure your vehicle's onboard voltage is +12 volts. 2. Remove the fuse from the device before connecting the wires. 3. Connect the yellow (A4) wire to the +12 volt DC power supply. 4. Connect the red wire (A7) to the ACC terminal of the ignition switch. 5.
Page 7
Controls 1. Turn on/off the device/Select source 2. IR receiver 3.LCD display 4. Next track / Fast forward / Radio tuning 5. Volume adjustment / Switch settings / Confirm selection 6. Previous track / Rewind / Radio settings 7. Return / Search 8.
Sizes Remote Removing the battery protection (CR-2025). The remote control comes with battery protection. The remote control will not work until the protection is removed. Battery replacement: 1. When the lithium battery has lost capacity, replace it as shown in the figure. 2.
Remote control Turning on / off the device 2. Volume adjustment 3. Switching radio ranges Reception of a call Previous track / rewinding back / Radio setting up 5. Choosing a source Next track / rewinding forward / Radio setting up 7.
Page 10
Main operations Turning on / off Press any button to enable the device. Press and hold the button (1) / SRC to turn off. Volume adjustment Rotate the volume control handle (5) to set the desired level. Choosing a source Press the button (1) / SRC to switch between sources Reproduction: Radio ->...
Loudness Enabling and setting loudness (2 levels). Subwoofer - subwoofer settings: Selecting the cutoff frequency of the L.P.F. filter (LPF): 80 /120 /160Hz Level control: Off / 0 -12dB. Fader Adjusting the relative volume between the front and rear speakers. Balance Adjusting the relative volume between left and right channels.
SYSTEM Demo mode - demo mode. Enable / disable demo mode.. Factory reset Reset / return to factory settings. Version (Âåðñèÿ ÏÎ) Software version. TUNER Range selection Press the button (17) BND, to select the radio broadcast band: FM1, FM2, Fm3. Storing and recalling radio stations Press and hold one of the number buttons (1-6) to memorize the current radio station.
BLUETOOTH Enable Enable/disable device detection via BT. PIN-code Change the PIN for BT pairing. MIC gain BT microphone level adjustment. SYSTEM Clock - clock setting Format Selection of time display format (12 / 24 hours). Adjust Setting hours / minutes. Beep Button sound.
Page 14
Connect the USB storage device to the connector on the front panel of the device. Mp3, FLAC files will start playing automatically. The USB connector supports charging mobile devices. Charging current - 1A. IMPORTANT! There are many free and other software for encoding FLAC, Mp3 and WAV files on the market, and depending on the encoding status and file format, you may experience poor playback quality or noise during playback.
Page 15
Pair your phone with the STORM-555BT receiver: 1. Turn on Bluetooth on your mobile device. 2. Find “STORM-555BT” in the list of available BT devices and connect to it. Authorization PIN: 1234 . 3. In case of successful connection, the “BT” indicator on the receiver’s display will stop blinking and will light up constantly.
Press the button (18) rst for 10 sec. to reset all settings except sound settings. Smartphone app Most device settings are available in the AurA Audio mobile app for Android or iOS. You can control the receiver from your smartphone: 1. Install the AurA app from Google Play or the App Store.
Page 17
Programming steering wheel buttons The ground wire (WHEEL GND) of the factory control panel must be connected to the black GND wire (A8), and the WHEEL KEY A and WHEEL KEY B signal wires must be connected to the A1 (pink) and A2 (brown) wires, respectively. The operating voltage range with the remote control buttons connected is from 0.3 to 3.3 V.
Specifications Main Operating voltage supply: 12 V (permissible limits 9.6 - 15 V) Fuse: 15 A Maximum output power: 4 x 51 W (4 ohms) Rated output power: 4 x 16 W (4 ohms) Speaker Impedance: 4 - 8 Ohm Frequency response: 20 Hz –...
WARRANTY CARD Model name STORM-555BT Serial No. Buyer name Buyer address Phone No. Sales date Signature Seller name/stamp...
Page 20
TERMS OF WARRANTY SERVICE The manufacturer guarantees the high quality and reliability of the products provided that the technical requirements described in Operating Instructions. This warranty is issued for a period of one year from the date of purchase and is provided in the event that the product is found to be defective due to inadequate quality of materials or workmanship of the manufacturer.
Need help?
Do you have a question about the STORM-555BT and is the answer not in the manual?
Questions and answers
Как настроить часы на магнитафоне аура 555
Как настроить часы в магнитоле Аура шторм 525- ВТ