Hans Grohe Pulsify Showerpipe 260 2jet 24240 Series Instruction Manual
Shower column including thermostat
Hide thumbs
Also See for Pulsify Showerpipe 260 2jet 24240 Series:
- Instructions for use/assembly instructions (44 pages) ,
- Instructions for use/assembly instructions (44 pages)
Related Manuals for Hans Grohe Pulsify Showerpipe 260 2jet 24240 Series
Summary of Contents for Hans Grohe Pulsify Showerpipe 260 2jet 24240 Series
- Page 1 hansgrohe 24240XXX Shower Column Including Thermostat Instruction Manual Home » hansgrohe » hansgrohe 24240XXX Shower Column Including Thermostat Instruction Manual Instructions for use Assembly instructions Pulsify Showerpipe 260 2jet...
- Page 2 24240XXX Pulsify Showerpipe 260 2jet Eco 24241XXX Contents 1 Safety Notes 2 Installation Instructions 3 Technical Data 4 Symbol description 5 Operation 6 Assembly 7 Documents / Resources 7.1 References Safety Notes Gloves should be worn during installation to prevent crushing and cutting injuries. The product may only be used for bathing, hygienic and body cleaning purposes.
- Page 3 toothed saw. Special information for UK If installing this product with a pump, please be aware that it has to have negative head switching. This product will not function with a positive head pump. Technical Data Operating pressure: max. 1 MPa 24240XXX Recommended operating pressure: 0,13 –...
- Page 4 The desired maximum temperature for example max. 42°C can be pre-set thanks to the safety function. Adjustment After the installation, the output temperature of the thermostat must be checked. A correction is necessary if the temperature measured at the output differs from the temperature set on the thermostat. Maintenance The check valves must be checked regularly according to EN 806-5 in accordance with national or regional regulations (at least once a year).
- Page 5 To guarantee the smooth running of the thermostat, it is necessary from time to time to turn the thermostat from total hot to total cold. Dimensions...
- Page 6 Flow diagram 1. Overhead shower 2. Hand shower Spare parts XXX = Colors 000 = Chrome Plated 140 = Brushed Bronze...
- Page 7 670 = Matt Black 700 = Matt White Special accessories (order as an extra)
- Page 8 tile-matching-disk #94517000 Cleaning www.hansgrohe.com/cleaning-recommendation...
- Page 9 http://www.hansgrohe.com/cleaning-recommendation Cleaning recommendation / Warranty / Contact Just clean: simply rub over the spray nozzles to remove lime scale. Operation To empty the overhead shower after use, hold it in a slightly inclined position.
- Page 10 close cold...
- Page 11 Fault Cause Remedy – Check water pressure (If a pump – Supply pressure inadequate has been installed check to see if th e pump is working). Insufficient water – Clean filter in front of the mixer an – Regulator filter dirty d on the MTC-thermo cartridge –...
- Page 13 Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440 E-Mail: info@hansgrohe.com · Internet: www.hansgrohe.com 02/2023 9.08437.01...
Need help?
Do you have a question about the Pulsify Showerpipe 260 2jet 24240 Series and is the answer not in the manual?
Questions and answers