English Deutsch Safety Notes Sicherheitshinweise Gloves should be worn during installation to prevent Bei der Montage müssen zur Vermeidung von crushing and cutting injuries. Quetsch- und Schnittverletzungen Handschuhe The hot and cold supplies must be of equal pressures. getragen werden. Große Druckunterschiede zwischen den Kalt- und Installation Instructions Warmwasseranschlüssen müssen ausgeglichen • Prior to installation, inspect the product for transport werden. damages. After it has been installed, no transport or Montagehinweise surface damage will be honoured. • Vor der Montage muss das Produkt auf Transportschä- • The pipes and the fixture must be installed, flushed den untersucht werden. Nach dem Einbau werden and tested as per the applicable standards. keine Transport- oder Oberflächenschäden anerkannt. • The plumbing codes applicable in the respective • Die Leitungen und die Armatur müssen nach den countries must be observed. gültigen Normen montiert, gespült und geprüft werden. Technical Data • Die in den Ländern jeweils gültigen Installationsricht- Operating pressure: max. 1 MPa linien sind einzuhalten. Recommended operating pressure: 0,1 - 0,5 MPa Technische Daten Test pressure: 1,6 MPa Betriebsdruck:...
Need help?
Do you have a question about the Focus M41 260 1jet 31820 3 Series and is the answer not in the manual?
Questions and answers