Download
Share
Print this page
  1. Manuals
  2. Brands
  3. dicodes Manuals
  4. Electronic Cigarettes
  5. SBS18350USBC
  6. Manual

dicodes SBS18350USBC Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
SBS18350USBC
manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the SBS18350USBC and is the answer not in the manual?

Questions and answers

Related Manuals for dicodes SBS18350USBC

Summary of Contents for dicodes SBS18350USBC

  • Page 1 SBS18350USBC manual...
  • Page 2 This provides a very compact design, even when using very long atomizers. The SBS18350USBC is powered by a single Li-Ion battery of size 18350, 18500 or 18650. Depending on the type of battery used, power should be limited.
  • Page 3 02 Feature List SBS18350USBC - Side by Side mod for use with 3 different battery sizes - optional use of 18350, 18500 and 18650 batteries (diff. battery tubes) - Use of atomizers with up to 24mm diameter - USB-C charge port with slectable charging at about 0.5A, 1A or 2A - Delivered with USB-C to USB-C cable (*) - Adjustable battery discharge level (2.5-3V)

  • Page 4: Display Operation

    03 Display Operation The SBS18350USBC is equipped with a graphical OLED display which provides all important information about the status during and for 4 seconds after each vape. Temperature controlled mode: Battery-voltage during Temperature during vape the vape, including voltage Other modes: battery symbol drop.
  • Page 5 05 Main Menu (Page 1) Switching On/Off and Menu-Operation The dicodes SBS18350USBC is switched on by pressing the button shortly 5 times. The display shows “Hello” and the user is led to the main menu. For actively switching off the device there is menu item “Switch Off”. When the value “0” is highlighted and pressing the button, the mod displays “Bye..”...
  • Page 6 Note that for coils with very low resistance, like Nickel-coils, a slight mechanical rearrangement (tightening the atomizer) can lead to drastical changes in the temperature control due to the change of contact resistances. We therefore recommend to use other than Nickel coils, e.g. the NiFe30 (RESISTHERM) wire from dicodes.
  • Page 7 The systems source resistance is the sum of the batteries inner resistance as the main contribution and all contact and wiring resistances of the device. As already stated, typical battery resistances vary from 18m to 100m depending on the type and age. The typical contact and wiring resistance of the SBS18350USBC sums up to about 10m .
  • Page 8 05 Main Menu (Page 4) Notes about high power vaping As the SBS18350USBC can be used up to 60W using a size 18650 battery, here some explanations for vaping at high power, i.e. 50-60W with one battery. It is strongly recommended that only the best in class batteries are used and that all contacts are kept clean.
  • Page 9 05 Main Menu (Page 5) Heater Control (Operation modes) The SBS18350USBC can be used in up to 5 operation modes. The mode can be selected in this menu: The default operation is either power (0) or temperature controlled vaping (1).
  • Page 10 05 Main Menu (Page 6) 2. Heater Protection Mode (only when Expert Mode=1) Main Menu The heater protection mode is a periodic interruption of the power applied to the coil. The duration and the repetition rate of the interrupts is selected by means of the para- meter “Heater Prot”...
  • Page 11 05 Main Menu (Page 7) Diagram for Boost-Function Fire Button Fire Button Power Power Boost-Time=6..10 Boost-Time=1-5 Boost-Pwr Boost-Pwr Power Time Time Active Switch Off The device is actively switched off using this menu item. As soon as the 0 is highlighted/inverted, pressing the button will switch off the device.
  • Page 12 (*1 ) The temperature coefficient selects the type of wire material in the range 050 to 650: When TC-mode is selected (Main menu HCtrl=1), the user must select the wire type to be NiFe30 (320, dicodes wire), Ni200 (620), Titanium (350), SS304 (105, V2A), SS316 (88), SS316L (92), NiFe48 (480) or “Other”. The value for “Other” is adjusted here.
  • Page 13 “Power”. The power limitation makes sense especially in the power vaping mode to reduce the range to the used atomizer and the battery size. All dicodes devices have a functionality to adjust the minimum discharge level of the battery between 2.5V and 3.0V. Almost all available batteries on the market specify the minmum discharge level of 2.5V to 2.7V.
  • Page 14 4.2V (CC). When the battery is nearly full, the constant voltage phase begins (CV). The SBS18350USBC measures the charge current and displays the value, as soon as an USB- source is plugged in. I.e. The devices is switched on when the battery is charged and does not switch off.
  • Page 15 During production, each device is tested and calibrated at several voltage and power settings in an automated test system and manually after assembly. Therefore the counters are not at 0, but will show values between 10 and 20. This behaviour is different compared to other dicodes devices.
  • Page 16 The SBS18350USBC also provides a charge contact at the bottom of the device, as many other dicodes devices. By inserting a fitting inlay into the dicodes charger station CS1, the device can be charged as well. The inlay is separately available as a 3D printed part.

  • Page 17: Warranty And Disclaimer

    If a sent back defective device is not covered by the warranty, dicodes will give the customer a quote for repair, before any repair action takes place.
  • Page 18 Friedrich der Große 70 D-44628 Herne Germany Phone: +49 2323 1463635 Email: info@dicodes-mods.de Web: www.dicodes-mods.de Errors excepted. Subject to technical or other changes without prior notice. c copyrights dicodes GmbH, Germany, no unauthorized reprint. May 2024, dicodes SBS18350USBC manual, ENG, revision 1...

This manual is also suitable for:

Sbs18350usb-c