madbeanpedals BeanScream Manual

BeanScream BeanScream
F
OVERDRIVE
X Type:
Build Level: Beginner
Based On: Ibanez® Tube Screamer™
The BeanScream (based on the Tube Screamer™) is the successor to the GreanBean project
which was offered on madbeanpedals from 2013-2023. This version adds a couple tweaks to offer
options beyond the core TS tone, but still retains all the classic settings of the stock circuit.
• VOL: Total Output.
• TONE: CCW is a treble cut, and CW is treble boost.
• DRIVE: Gain amount.
• SUBS: This control blends in extra bottom end at the clipping stage. It also increases the
overdrive amount.
• CLIP: Selects between silicon (stock), mosfet or LED clipping.
Further Study:
https://www.electrosmash.com/tube-screamer-analysis
Terms of Use: You are free to use purchased BeanScream circuit boards for both DIY and small commercial operations. You may not offer BeanScream PCBs for
resale or as part of a "kit" in a commercial fashion. Peer to peer re-sale is fine, though.
Technical assistance for is available via the
available to respond via email in a timely and continuous manner, and (2) posting technical problems and solutions in the forum creates a record from which other
members may benefit.
All copyrights and registered trademarks are property of their original owners. Any mention of trademarked or intellectual properties in this documents is purely for
comparative purposes.
Overview
Controls
madbeanpedals forum. Please go there rather than emailing me for personal assistance. This is because (1) I'm not always
Last Updated:
June 7, 2024 11:53 AM
© 2024 madbeanpedals