Table of Contents
Advertisement
Quick Links
Red Line
Installation, Operation, Maintenance & Service
Model No.
Serial No.
Filter No.
Start-Up Date
RB331, RB331PROLO & R331
READ AND UNDERSTAND THE OPERATOR'S INSTRUCTION MANUAL
54 Winter St. • Holyoke, MA 01040 • (413) 532-4030 • info@ruwac.com
THOROUGHLY BEFORE ATTEMPTING TO OPERATE THIS EQUIPMENT.
54 Winter St. • Holyoke, MA 01040 • (413) 532-4030 • info@ruwac.com
Machine specific Operator's Instruction Manuals are offered at edcoinc.com/customer-resources/manuals-parts-lists/
INSTRUCTION MANUAL
Vortex 330 Vacuum
Death or serious injury could occur if this machine is used improperly.
54 Winter St. • Holyoke, MA 01040 • (413) 532-4030 • info@ruwac.com
EQUIPMENT DEVELOPMENT COMPANY, INC.
100 Thomas Johnson Drive, Frederick, MD 21702-4600 USA
Phone: 800-638-3326 or 301-663-1600 • Fax: 800-447-3326 or 301-663-1607
1-800-638-3326
1-800-638-3326
• edcoinc.com • techsupport@edcoinc.com
Website: www.edcoinc.com • E-mail: techsupport@edcoinc.com
OPERATOR'S
E-VORTEX330-I-0224
Version: 1.0 12/15/23
Version: 1.0 12/15/23
Version: 1.0 12/15/23
Printed in USA
©2024
JWA
Page 1
Advertisement
Table of Contents
Related Manuals for Edco Vortex 330 Vacuum
Summary of Contents for Edco Vortex 330 Vacuum
- Page 1 RB331, RB331PROLO & R331 OPERATOR’S Start-Up Date INSTRUCTION MANUAL RB331, RB331PROLO & R331 Vortex 330 Vacuum Version: 1.0 12/15/23 Version: 1.0 12/15/23 READ AND UNDERSTAND THE OPERATOR’S INSTRUCTION MANUAL 54 Winter St. • Holyoke, MA 01040 • (413) 532-4030 • info@ruwac.com THOROUGHLY BEFORE ATTEMPTING TO OPERATE THIS EQUIPMENT.
-
Page 2: Safety Information
E-VORTEX330-I-0224 SAFETY INFORMATION SAFETY MESSAGES ELECTRICAL POWERED EQUIPMENT CONTINUED • Safety Instructions are proceeded by a graphic alert symbol of DANGER, • Do not disconnect power by pulling cord. To disconnect, grasp the WARNING, or CAUTION. plug, not the cord. •... -
Page 3: Table Of Contents
E-VORTEX330-I-0224 OPERATOR’S INSTRUCTION MANUAL Vortex 330 Vacuum TABLE OF CONTENTS Section Page Number Safety Information ........2 Warnings California Proposition 65 Warning . -
Page 4: Warnings
California. While the exposure from EDCO products may be negligible or well within the “no significant risk” range, out of an abundance of caution, EDCO has elected to provide these Proposition 65 warnings. -
Page 5: Dust And Crystalline Silica Warning
E-VORTEX330-I-0224 Warnings DUST AND CRYSTALLINE SILICA WARNING Grinding/cutting/drilling of masonry, concrete, metal and other materials can generate dust, mists and fumes containing chemicals known to cause serious or fatal injury or illness, such as respiratory disease, cancer, birth defects or other reproductive harm. If you are unfamiliar with the risks associated with the particular process and/or material being cut or the composition of the tool being used, review the material safety data sheets and/or consult your employer, the manufacturers/suppliers, governmental agencies such as OSHA and NIOSH and other sources... -
Page 6: Safety
E-VORTEX330-I-0224 Safety CAUTION: Standard EDCO VAC machines are not to be used for the removal of liquids or any volatile, viscous, flammable or explosive media. If you are unsure about your application requirements consult your EDCO representative. CAUTION: Standard EDCO VAC machines are designed for intermittent use, i.e. not more then 2 hours continuously. -
Page 7: Start-Up
E-VORTEX330-I-0224 III. Start-Up Start-Up RED LINE STANDARD INSTRUCTIONS: START-UP / SHUTDOWN OPERATION NOTE: A qualified electrician in accordance with the National Electric Code and all local codes should perform all wiring and / or electrical adjustments during installation and servicing. Pull up on the dust pan Connect the machine Turn the machine on... -
Page 8: Filter Inspection
Note: Using an object to dislodge material may tear the filter. Consult your RUWAC representative filter. actuated lever. EDCO seconds. blocka seconds. blocka if material blockage is excessive. Do not use high pressure compressed air or water to clean off Note: Using an object to dislodge material may tear the filter. -
Page 9: Inspection & Maintenance
Inspection & Maintenance E-VORTEX330-I-0224 Inspection & Maintenance RED LINE STANDARD INSTRUCTIONS: FILTER REMOVAL WARNING: Always wear a dust mask when performing filter inspections or service. Remove all of the Place the vacuum Separate and remove Disconnect the motor screws securing the under pressure by the motor deck from deck ground wire from... -
Page 10: Filter Installation
E-VORTEX330-I-0224 Inspection & Maintenance Inspection & Maintenance RED LINE STANDARD INSTRUCTIONS: Inspection & Maintenance FILTER INSTALLATION RED LINE STANDARD INSTRUCTIONS: WARNING: Always wear a dust mask when performing filter inspections or service. FILTER INSTALLATION WARNING: Always wear a dust mask when performing filter inspections or service. Connect the motor Insert mesh inserts in Place in the filter cage... -
Page 11: Hepa Maxx Compact Filter Maintenance
running Remove the motor Disconnect the ground running Remove the motor Disconnect the ground E-VORTEX330-I-0224 ocked, deck and disconnect wire and remove wire and remove ocked, deck and disconnect Inspection & Maintenance e motor the ground wire. HEPA filter spacer. HEPA filter spacer. - Page 12 running Remove the motor Disconnect the ground E-VORTEX330-I-0224 Disconnect the ground r running Remove the motor Inspection & Maintenance wire and remove ocked, deck and disconnect locked, deck and disconnect wire and remove Inspection & Maintenance HEPA filter spacer. e motor the ground wire.
-
Page 13: Hepa Maxx Filter Maintenance
E-VORTEX330-I-0224 Inspection & Maintenance Inspection & Maintenance Inspection & Maintenance Inspection & Maintenance Inspection & Maintenance Inspection & Maintenance Inspection & Maintenance RED LINE STANDARD INSTRUCTIONS: Inspection & Maintenance Inspection & Maintenance HEPA MAXX FILTER MAINTENANCE RED LINE STANDARD INSTRUCTIONS: RED LINE STANDARD INSTRUCTIONS: RED LINE STANDARD INSTRUCTIONS: RED LINE STANDARD INSTRUCTIONS:... -
Page 14: Hepa Maxx Filter Installation
E-VORTEX330-I-0224 Inspection & Maintenance Inspection & Maintenance Inspection & Maintenance Inspection & Maintenance Inspection & Maintenance Inspection & Maintenance RED LINE STANDARD INSTRUCTIONS: Inspection & Maintenance Inspection & Maintenance RED LINE STANDARD INSTRUCTIONS: HEPA MAXX FILTER INSTALLATION RED LINE STANDARD INSTRUCTIONS: ANDARD INSTRUCTIONS: RED LINE STANDARD INSTRUCTIONS: NDARD INSTRUCTIONS:... - Page 15 E-VORTEX330-I-0224 Inspection & Maintenance Inspection & Maintenance RED LINE STANDARD INSTRUCTIONS: Inspection & Maintenance Inspection & Maintenance Inspection & Maintenance Inspection & Maintenance HEPA MAXX FILTER INSTALLATION TIONS: Inspection & Maintenance Inspection & ONS: CAUTION: Motor deck will be heavy and may require two people to remove. Inspection &...
-
Page 16: Bag-To Valve Attachment & Emptying
During operation, the Direct Bagger valve is kept closed by the negative pressure in the vac During operation, the Direct Bagger valve is kept closed by the negative pressure in the vacuu When the vacuum is turned off, the valve will open and empty the contents of the vacuums When the vacuum is turned off, the valve will open and empty the contents of the vacuums into E-VORTEX330-I-0224 attached plastic bag. -
Page 17: Floor Sweep Installation
Inspection & Maintenance E-VORTEX330-I-0224 Inspection & Maintenance Inspection & Maintenance RED LINE INSTRUCTIONS: RED LINE INSTRUCTIONS: FLOOR SWEEP INSTALLATION FLOOR SWEEP INSTALLATION STANDARD INSTRUCTIONS: STANDARD INSTRUCTIONS: Remove the four Mounting bracket Install the mounting plastic plugs from should be behind bracket and hardware Remove the four Mounting bracket... -
Page 18: Ametek Motor Brush Inspection
E-VORTEX330-I-0224 Inspection & Maintenance Inspection & Maintenance AMETEK MOTOR BRUSH INSPECTION RED LINE STANDARD INSTRUCTIONS: AMETEK MOTOR BRUSH INSPECTION NOTE: A motor brush should be replaced if its length is less than 0.25 inches. Make sure the power is Using a flat screwdriver, remove the brush disconnected from the motor. - Page 19 E-VORTEX330-I-0224 Inspection & Maintenance Inspection & Maintenance AMETEK MOTOR BRUSH INSPECTION RED LINE STANDARD INSTRUCTIONS: CONTINUED AMETEK MOTOR BRUSH INSPECTION NOTE: A motor brush should be replaced if its length is less than 0.25 inches. Connect the brush to the field wire making sure that the connection is at 45 degree angle before re- installing.
-
Page 20: Trouble Shooting
E-VORTEX330-I-0224 Trouble Shooting Troubleshooti PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Insufficient Vacuum - Motors are not on and/or - Turn both motors on, check motor brushes Pressure working - Dustpan improperly seated - Remove dustpan, inspect seal, replace dustpan. - Filter clogged or improperly - Follow filter inspection procedure, section IV. - Page 21 E-VORTEX330-I-0224 THIS PAGE LEFT BLANK INTENTIONALLY 1-800-638-3326 1-800-638-3326 • edcoinc.com • techsupport@edcoinc.com Page 21...
- Page 22 E-VORTEX330-I-0224 THIS PAGE LEFT BLANK INTENTIONALLY 1-800-638-3326 1-800-638-3326 • edcoinc.com • techsupport@edcoinc.com Page 22...
-
Page 23: Limited Equipment Warranty Of Sale
*Seller reserves the right to alter payment terms. EDCO will, at its option, repair or replace, at the EDCO factory or at a point designated by EDCO, any part which shall appear to the satisfaction of EDCO inspection to have been 3. -
Page 24: Stop - Before Using This Product
EDCO product group. The information in these tracks help businesses be successful with those products. EDCO is always updating online training / information so you always have the most recent content. Also see Operator’s Safety & Limited Warranty Manual Equipment Development Co., Inc.
Need help?
Do you have a question about the Vortex 330 Vacuum and is the answer not in the manual?
Questions and answers