Page 2
Back view, Closing the door Power Scroll Mode (Video/Picture) Menu OK, Record, Shutter button Scroll Strap post Digital Zoom + – Battery (not Door user-replaceable) latch Door release Important: To prevent breakage, push at a 45-degree angle. www.kodak.com/go/easysharecenter...
Page 3
Understanding the status icons www.kodak.com/go/Zm2support...
Setting up your camera 1 – 2 hours Charging the battery ( Charge the battery when necessary. Turn off the camera, first. Make sure the computer is turned on and not in sleep, standby, or hibernate mode. Slide the USB release to the right.
Page 5
Maximum supported card size is 16 NOTE: The included MICROSD Card is already inserted. CAUTION: A card can only be inserted one way; forcing it may cause damage. Inserting or removing a card while the camera is on may damage the video/pictures, the card, or the camera.
Setting up your camera Turning on the camera Setting the date/time At the prompt, press OK. to change the current field. for previous/next field. OK to accept. Change date/time later see page 11 www.kodak.com/go/Zm2support...
Taking videos and pictures Press the OK button to start/stop recording. Take videos (Press to choose a different recording mode. to choose Picture Press Take pictures Press the OK button to take a picture. Digitally Press to zoom in and out. zoom www.kodak.com/go/easysharecenter...
Press to highlight Review , then press OK. to scroll through pictures/videos. • Press • Press OK to play a video or zoom a picture. to navigate a zoomed picture. • Press Press Menu to return to recording mode. www.kodak.com/go/Zm2support...
Press the Menu button to highlight Review , then press OK. Press Press to scroll through pictures/videos. Press , then press OK. to highlight Delete Follow the prompts to delete the picture/video. Press Menu to return to recording mode. www.kodak.com/go/easysharecenter...
Using your camera Changing settings Menu Press the Menu button Press to highlight a setting, then press OK. to change a setting, then press OK. Press Press Menu to return to recording mode. Review Date/Time Brightness Format Sound Information Card...
Using your camera Transferring, editing, sharing online 1 Turn on the camera, then connect it. Slide the USB release to the right. If necessary, gently pull the USB out until it locks. To retract the USB, slide the USB release to the right and push the USB in until it locks.
Page 13
Using your camera 2 If this is the first time you’ve connected to this WINDOWS OS-based computer, you’re prompted to install ARCSOFT MEDIAIMPRESSION SE for KODAK Software. You can then transfer and share videos and pictures. MAC OS—Videos and pictures can be used with the APPLE iLIFE suite of products.
Solution ■ Low battery. Charge the battery. ■ Corrupt or unusable file(s). Transfer videos/pictures to your computer, then format the card or internal memory. ■ Internal memory is full. Transfer videos/pictures to your computer, or use a MICROSD/SDHC Card to take more videos/pictures.
Page 15
Camera will not turn on. Ensure that the battery is charged. ■ Ensure the camera is clean and dry. (If it’s wet inside, let it dry for 24 hours.) ■ Videos are choppy or Use ARCSOFT MEDIAIMPRESSION SE for KODAK Software for video...
Getting help Getting help on the Web Get support for your product www.kodak.com/go/Zm2support (FAQs, troubleshooting information, etc.) See step-by-step solutions and www.kodak.com/go/stepbystep repair information Purchase camera accessories www.kodak.com/go/Zm2accessories Download the latest camera www.kodak.com/go/Zm2downloads firmware and software See online demonstrations of www.kodak.com/go/howto...
Before inserting or removing a card, make sure your hands, the camera, and the card are completely dry. ■ If water has entered the camera, remove the card. Allow all components to air-dry for at least 24 hours before using the camera. ■...
■ Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions unless designed specifically for camera lenses. Do not allow chemicals, such as suntan lotion, to contact painted surfaces.
Page 19
Kodak (such as adapters and cables), or claims made after the duration of this warranty. Kodak makes no other express or implied warranty for this product. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be the length of the express warranty period specified on your KODAK Product packaging.
Regulatory compliance FCC compliance and advisory This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications.
Page 21
Appendix Eastman Kodak Company Rochester, New York 14650 Kodak, 2010 All screen images are simulated. Kodak is a trademark of Eastman Kodak Company. MICROSD and MICROSDHC are trademarks of the SD Card Association. 4H7259_en www.kodak.com/go/Zm2support...
Need help?
Do you have a question about the ZM2 and is the answer not in the manual?
Questions and answers