Kodak Digital Camera User Manual

1. Make sure camera in turned on.
2. Open Kodak 1D software.
3. Select DC290 capture icon (top left or under File).
4. Select exposure time: Bright bands 1
5. Select image size

6. Saving your image

Method 1

-
deselect Open Immediately
-
click on Camera Pref: for Jpeg files select a compressed Image Resolution,
for Tiff files select an uncompressed Image Resolution, click ok
-
click on Export Image, choose location and name file
-
open Jpeg (or Tiff) file in Kodak 1D, manipulate image and save as Kodak
1D file (you must RENAME it or you will lose it).
-
Re-open Kodak 1D image and save as Jpeg or Tiff (again you need to
RENAME it). This will save your manipulated image.

Method 2

-
select Open Immediately
-
Take Picture
-
Save (automatically saves as a Kodak 1D file)
-
Select "Save as", RENAME file (you must rename it or you will lose it),
choose Jpeg or Tiff from the scroll down

7. DELETING THE KODAK 1D IMAGE

-
after you have saved your image (manipulated or not) as a Jpeg or Tiff
(either by Method 1 or Method 2) please DELETE the Kodak 1D image.
These images are very large in size and will use up the computers memory
at a very fast rate.
-
ALL IMAGES REMAINING ON THE HARD DRIVE AT 12:01 PM
FRIDAY WILL BE DELETED. NO EXCEPTIONS!
Contact: Melanie Lewis Ivey (Rm 231, ext 2704)

KODAK IMAGING INSTRUCTIONS

Faint bands
Normal bands 2
3