Table of contents Getting started with your camera 2 Opening the USB/charging door 2 Charging the non-removable battery 3 Using an accessory SD/SDHC Card 4 Turning on the camera 5 Setting the language, date/time 6 Taking a picture or video 7 Reviewing pictures/videos 8 Deleting videos/pictures 9 Transferring, sharing online, editing 10...
Opening the USB/charging door The non-removable battery charges when the computer is on and awake; disable your computer’s hibernation, sleep, and standby modes. Charge the battery as often as you like—you can’t over-charge it—and always fully charge before using. www.kodak.com/go/support...
(and erase those in internal memory). Purchase cards Turn off the camera. Insert a card until it clicks. Accessory www.kodak.com/go/accessories www.kodak.com/go/support To remove a card, press and release it.
Setting the language, date/time to change. to accept. At the prompt, press OK. to change current field. for previous/next field. to accept. See the Extended user guide www.kodak.com/go/Ze2manuals www.kodak.com/go/support...
Taking a picture or video Turn on the Glare Shield (if enabled in the Settings menu) to improve LCD viewability. Zoom in/out. Change between picture and video recording modes. (In Review or in a menu, return to Liveview.) Video recording modes HD720p for viewing on a TV or computer,...
Reviewing pictures/videos Review Previous/next video/picture. Play/Pause. (Press and hold to Stop.) While playing a video: Adjust volume Fast-forward/rewind www.kodak.com/go/support...
Connect the camera to the computer USB port. (It turns on automatically.) If this is the first time you’ve connected to this computer, follow the prompts to install the KODAK Share Button App and—for WINDOWS OS-based computers— ARCSOFT Software.* Follow the on-screen instructions to transfer and share videos.
• transferred them to your computer Keep learning! Finish reading this book, so you can take and share your best videos and pictures! Go to www.kodak.com/go/Ze2support for: • the Extended user guide • camera firmware updates • answers to your frequently asked questions...
Product overview, features Back view Record mode Review On bottom: • USB Arm • AV Out See the Extended user guide www.kodak.com/go/Ze2manuals www.kodak.com/go/support Settings Record/OK Delete Share...
Side view Power button Use the Reset button See the Extended user guide Product overview, features Slot for accessory SD/SDHC Card See page 21 www.kodak.com/go/Ze2manuals Camera Reset button HDMI Out...
The camera does not float. Secure it to your wrist with the strap (see a floating accessory strap at www.kodak.com/go/accessories). To keep the camera waterproof, tightly close and latch all doors. Do not open doors in water or when hands are wet.
If you have an HD television, use an HDMI cable—and get the richest playback experience. (Cables are sold separately.) HDMI Cable AV Cable NOTE: Set your TV’s input setting to HDMI or AV. Set Video Output (NTSC/PAL) Purchase accessories Doing more with your camera page 18 www.kodak.com/go/accessories...
Adjust sensitivity of the internal microphone. Turn on/off sounds. Set the date/time addresses are offered when you share. Choose the setting (NTSC, PAL) for your region. Choose your language. default. Erase, format the card. View firmware and ARCSOFT Software versions www.kodak.com/go/support...
Trimming a video Use the Trim Video feature to remove an unwanted video start or finish. 1 Press the Review button video to trim. Optional: Play, then pause the video at the desired new start point. 2 Press the Settings button 3 Press An instruction screen appears.
Doing more with your camera Zooming and panning a picture 1 Press the Review button 2 Press to choose a picture. 3 Press OK repeatedly to choose 2x, 4x, 8x, then back to 1x. 4 Use to pan the picture. www.kodak.com/go/support...
1 second. The camera turns off. When you turn on the camera again, you may need to reset the Date and Time. Go to www.kodak.com/go/Ze2support user guide, firmware updates, and answers to your questions. Status Low battery.
Page 22
Let it dry for at least 24 hours.) ■ Ensure that the lens is clean. ■ Ensure that the subject is at least 1 m (3.3 ft) from the lens. www.kodak.com/go/support 10), then 18) or card 10). (page 18),...
Page 23
Videos do not play on a TV. Solve problems with ARCSOFT Software. Solving camera problems Solution ■ Use ARCSOFT MEDIAIMPRESSION for KODAK Software for video playback (page 10). ■ Ensure that the computer system requirements are met. Go to www.arcsoft.com/support www.kodak.com/go/HDsysreq.
Appendix IMPORTANT: The shock resistance and water resistance of this product are based on Kodak test results and do not constitute any guarantee that the product will perform, will not be damaged, or will not malfunction under such conditions. Though the camera...
Need help?
Do you have a question about the PlayFull ZE2 and is the answer not in the manual?
Questions and answers