Kodak THEATRE HD PLAYER Extended User Manual page 72

Troubleshooting and support
Status
Pointer remote does
not work.
The on-screen cursor
continually spins while
you try to view pictures
on the KODAK Gallery.
A pairing error
indication appears on
the pointer remote.
The Camera, USB, or
Memory Card buttons
are dimmed/disabled.
72
Solution
■
If the power status light on the pointer remote is not lit, press the
Hide Cursor button to wake it up.
■
If the power status light on the pointer remote is flashing red,
replace the batteries (2 alkaline AA); see
■
Make sure the HD player is powered on.
■
Place the pointer remote on top of the HD player and restart
(unplug the HD player, then plug it back in).
The Gallery may be experiencing heavy traffic. Try again, later.
■
Pair the pointer remote with the HD player:
1
While holding down the Hide Cursor button, roll the scroll
wheel for approximately 4 seconds.
2
When the power status light on the pointer remote flashes
blue, release the Hide Cursor button and scroll wheel. The
pointer remote attempts to pair with the HD player for up to 40
seconds. When successful, the power status light flashes blue
for 2 seconds.
Connect an EASYSHARE Camera, USB storage device, or memory card
to the HD player to activate the buttons.
www.kodak.com/go/easysharecenter
page 14.