Kodak THEATRE HD PLAYER Extended User Manual page 18

Getting started
3 Connect the HD player to your HDTV (or to an HDMI computer monitor). Find the
audio and video ports on the back of your TV or receiver; use the appropriate cables
for your setup. HDMI or component connections provide a quality experience. Note
the HDMI or component inputs used.
■ Do not connect the unit through a VCR. (Video signals fed through VCRs may be
affected by copyright protection systems, and the picture will be distorted on the
television.)
■ If the component audio/video cables provided in the box are not used, Kodak
recommends a Category 2 HDMI cable with ferrite beads at both ends.
18 www.kodak.com/go/easysharecenter