Using The Pointer Remote - Kodak THEATRE HD PLAYER Extended User Manual

Getting started

Using the pointer remote

The pointer remote automatically pairs with the HD player when the batteries are
installed for the first time and the HD player is powered on. The pointer remote power
light blinks blue while pairing. When successful, the power light blinks blue rapidly for
2 seconds.
If pairing fails, the power light blinks red 3 times, pauses for half a second, and repeats
3 times. See page 70
Installing the batteries
14
for possible solutions.
1 Push down on the latch and hold to release the
battery cover. Slide the battery cover out then up to
remove.
www.kodak.com/go/easysharecenter