Read Me First; Pre-Installation Note - SunSetter Solar-Powered EasyShade Owner's Manual & Installation Instructions

WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN PERSONAL INJURY!
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE PERFORMING THIS INSTALLATION.

READ ME FIRST

Congratulations!
You have just purchased a Solar-Powered EasyShade. This EasyShade saves energy by stopping the glare
and heat before it can enter your home, yet still lets you enjoy your view, all at the touch of a button.
Customer Support
Our technical experts are available via email at contactus@sunsetter .com or call us at 800-670-7071 should
you require assistance. We also invite you to visit the Owner's Corner at https://www .sunsetter .com/oc/
ocloginnew/ for additional information on your Solar-Powered EasyShade. You may need to register your
purchase by calling 800-670-7071. Please be prepared to provide the size (width) of the EasyShade, color of
housing, color of fabric panel, and date of purchase.
Factory Limit Settings
The Up and Down stop limits on the EasyShade motor were set at the factory to stop 36" from the aluminum
housing. This will allow for completion of the installation process, where you will be instructed to adjust the
Down position limit to a maximum 84" (7').
Remote Transmitter
SunSetter EasyShades are programmed to operate on channel 1 of the specific remote provided with the
EasyShade. The EasyShade can be operated on any individual channel or multiple channels, and more than
one EasyShade can be operated on the same channel. See Appendix C for Programming Instructions for the
Multi-Channel Remote Transmitter.

Pre-Installation Note

Note: Prior to installing your Solar-Powered EasyShade, please review Figure 1 (Solar Powered EasyShade
Schematic View), then inspect to ensure that there are no obstructions on your wall surface, such as light
fixtures or door handles, that would interfere with or block the fabric panel as it extends. For proper operation,
you must ensure that the aluminum housing and cable guide brackets are mounted on the same vertical
plane or surface.
The Solar-Powered EasyShade can be installed with the mounting brackets on a wall (Vertical Surface, see
Figure 4) or on the underside of a structure (Horizontal Surface, see Figure 5). Each of the brackets should be
installed no more than 10" from the end of the aluminum housing. For 10' to 12' models, the third mounting
bracket should be installed at the midpoint between the two end brackets.
The aluminum housing requires 3-1/2" of clear, unobstructed space along the mounting surface of the wall or
underside of the structure/soffit.
Vertical space between the aluminum housing and the lower location of the cable guide bracket must be clear
of obstructions to allow the fabric panel to freely extend.
2