EPH Controls RDT-RF Installation And Operation Manual page 11

1) Remove the thermostat from its packaging.
2) Choose a mounting location so that the thermostat can
measure the room temperature as accurately as possible.
- Mount the thermostat 1.5 meters above the oor level.
- Prevent direct exposure to sunlight or other heating /
cooling sources.
3) Press the fastening clip on the base of the thermostat to release
the front housing from the rear wiring box as per diagram on
page 10.
4) Wire the thermostat according to the wiring diagram on page 7.
5) Screw the rear wiring box to the recessed back box.
6) Attach the front housing to the rear wiring box until it clips
securely into place.
EPH Controls Ltd.
9