Kodak EasyShare DX6340 User Manual page 97

Problem
In Review mode,
you do not see a
picture (or the
expected picture)
on the camera
screen.
Picture is too
dark.
Chapter 10
Cause
The camera may not be
accessing the correct
storage location.
Flash is not on.
The subject is too far
away for the flash to
have an effect.
The subject is in front
of a bright light
(backlit).
Not enough light.
Auto exposure was not
achieved.
Solution
Check the picture storage location
setting (page 10).
Turn on the flash
Move so there is no more than
19.4 ft (5.9 m) between the
camera and the subject; 8.9 ft
(2.7 m) in Telephoto.
Use Fill flash (page
your position so light is not behind
the subject.
In Landscape mode, use Long
Time Exposure (page
In Landscape, Close-up, or PAS
modes, set ISO to 400
Use PAS mode to change the
shuuter speed (page
To take the best possible pictures,
press the Shutter button
half-way and hold. When the
ready light glows green, press the
Shutter button the rest of the
way down to take the picture.
(page 22).
22) or change
33).
(page 32).
15).
85