Upgrading Your Software And Firmware; Tips, Safety, Maintenance - Kodak EasyShare DX6340 User Manual

Feature
Video Date Display
Video Out
White Balance

Upgrading Your Software and Firmware

Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera).
See www.kodak.com/go/dx6340downloads.

Tips, Safety, Maintenance

m
Always follow basic safety precautions. Refer to the "Important Safety
Instructions" booklet packed with your camera.
m
Do not allow chemicals, such as suntan lotion, to come into contact with
the painted surface of the camera.
m
If the camera has been subjected to inclement weather or you suspect
water has gotten inside the camera, turn off the camera and remove the
battery and card. Allow all components to air-dry for at least 24 hours
before using the camera again. If this does not resolve the problem,
contact customer support
m
Clean the lens and camera screen:
1 Blow gently on the lens or camera screen to remove dust and dirt.
2
Wipe the lens or camera screen gently with a soft, lint-free cloth or an
untreated lens-cleaning tissue.
Do not use cleaning solutions unless they are designed specifically for
camera lenses. Do not wipe the camera lens or camera screen with
chemically treated eyeglass lens tissue. It may scratch the lens.
m
Wipe the outside of the camera with a clean, dry cloth. Never use harsh or
abrasive cleaners or organic solvents on the camera or any of its parts.
Chapter 12
Factory Setting
None
NTSC
Auto
(page 97).
105